Pergo Outlast+ has an attached foam underlayment. Use only a vapor barrier when installing over a concrete subfloor. When installing Pergo Outlast+ with attached underlayment foam over a wood subfloor, no other additional foam underlayment is required.
Without underlayment to add a layer between these damp subfloors and the surface flooring, your laminate can quickly become wet, warped, and mildewy, harming its overall integrity. Moisture over time can also break down floor adhesive which causes the floor to start warping.
Pergo Outlast is a durable, waterproof laminate flooring with an authentic look and feel that can stand up to all your home's traffic including your household pets.
A polyethylene film vapor barrier is not required over wood subfloors if moisture readings of wood subfloors are ≤14% throughout the entire installation.
We advise to always use a Pergo underlay. They are specially designed to offer excellent sound reduction, thermal resistance and levelling. The choice of a Pergo underlay will make sure the installation goes much smoother.
Tip. Pergo laminate flooring must never be waxed, polished, sanded or refinished. Difficult spots like nail polish, markers, tar and cigarette burns can be removed with acetone or nail polish remover.
A polyethylene film vapor barrier is not required over wood subfloors. Moisture readings of wood subfloors must be ≤12% throughout the entire installation. For planks without attached underlayment, install over a single layer of underlayment appropriate for laminate floors.
Pergo is intended only for indoor use. b. Acclimation—Allow the Pergo planks to lay flat in unopened cartons, at least two feet from walls where they will be installed, for 48-96 hours before starting the installation. In very dry or very humid climates, allow at least 96 hours (4 days).
Very often, particularly in a below-grade installation on a concrete basement floor, a vapor barrier is recommended in addition to the underlayment. That vapor barrier would go between the subfloor and the underlayment.
Laminate flooring is not waterproof, which means that it is susceptible to water damage. If water gets underneath the flooring, it can cause the planks to swell, warp, or buckle. This can result in unsightly gaps, a wavy appearance, or even a complete failure of the flooring.
Pergo Outlast+® is made for people who really live on their floors because these laminate wood floors stand up to life's everyday accidents. Resistant to dents, scratches, stains and spills, these beautiful wood-looks are waterproof, kid proof and totally worry-free.
Unless you are a quick draw on the mop; dog urine will damage laminate flooring, real wood flooring, engineered wood and tile grout. Unfortunately with a lot of flooring the pee will be absorbed into the floor itself or underneath and this is what can make the issue very difficult and expensive.
Underlayment is necessary to provide a moisture protection, sound insulation, and a smoother surface for the laminate. Installing laminate directly on the subfloor can lead to noise issues, discomfort, and potential damage from moisture.
Underlayment Not Required - Laminate Wood Flooring - The Home Depot.
Underlay protects your laminate against moisture damage
For cold subfloors like concrete, you need to consider a damp proof membrane. Cold ground floor subfloors are often prone to damp, which can damage your laminate. An underlay with a vapour barrier helps prevent this.
Before installing your new Pergo laminate floor, be sure to select the right underlay. Underlays increase walking comfort, improve your room's acoustics, avoid creaking noises, supports the click system and protect floors from rising damp.
When exposed to water or excessive humidity, laminate planks may absorb moisture, leading to swelling and subsequent lifting from the subfloor. Temperature variations also play a crucial role, as the natural expansion and contraction of laminate planks can result in buckling over time.
Expected lifespan of laminate floors
On average, laminate flooring can last 15 to 25 years with proper care and maintenance. However, some higher-quality laminate floors can last even longer, potentially up to 30 years.
BATHROOM INSTALLATIONS - Because the Pergo surface is resistant to water, Pergo laminate flooring can be installed in bathrooms. However, it is very important to prevent water or moisture from getting under the floor.
If you are installing your flooring with the pre-attached underlayment over a cement subfloor, you will want to use a vapor barrier. This type of underlayment is a moisture resistant film and does not have any additional padding, so it will not pose a risk to your flooring.
The two flooring styles have the same AC (hardness rating), same thickness but, a difference in the overall number of styles and that the Lowe's TimberCraft doesn't include underlayment attached to the plank. Both Outlast Plus and TimberCraft use the same installation steps to create the watertight result.
Use Pergo Floor Cleaner -- just follow the directions. Use a Swiffer Wet Jet with the regular Swiffer Cleaner (not the Swiffer Cleaner for hardwood floors). Don't use the wet jet to spray the liquid. Just dampen the Swiffer cloth with the Swiffer Cleaner and go over the floor.
A residential steam mop may be used provided the steam is applied to a microfiber pad and not applied directly to the floor. Make sure to set the temperature of the steam mop to the appropriate setting for laminate floors, or to the lowest setting.
Laminate flooring, while cost-effective and popular, can experience problems such as buckling, warping, and fading. These issues often arise from water damage, prolonged exposure to sunlight, and inherent design limitations.