A: Thank you for your question. OxiClean is not recommended to be used on for rust stains on non-metal surfaces.
A: I would definitely NOT use this or regular Oxyclean to try to remove rust. In fact, Oxyclean can cause rust stains if you use it to pretreat stains on clothes - and then hang the clothes on a metal drying rack while waiting to launder them.
Both vinegar and lemon juice have natural acid properties that can help dissolve rust. Let it sit for about 10 minutes before wiping it away. For tough stains that don't respond to household remedies, look for a commercial rust remover.
OxiClean™ MaxForce™ is not designed to be used on dry clean only fabrics and should not be used on wool or silk items.
Most people know WD-40 Multi-Use Product as a lubricant, but it was originally used as an anti-corrosive by the aerospace industry to prevent spacecraft from rusting. WD-40 can help remove rust from metals like iron, chrome, and stainless steel without further damaging the surface of the metal or removing the paint.
Rust 911 removes lighter rust in about 10 minutes, or you can soak parts in it for up to 24 hours for more extensive rust. As with other chelating rust removers, you can use it repeatedly until it turns black. And since it's non-toxic and environmentally safe, simply pour it down the drain when you're done.
OxiClean contains several ingredients, but the important one for boosting and brightening laundry is sodium percarbonate — basically, dry hydrogen peroxide plus washing soda (also called sodium carbonate, which is very similar to but not exactly baking soda).
Damages Fabric
Soaking clothes in Oxiclean for too long can make the fabric weaker. This is especially true for delicate fabrics like wool, silk, or spandex. The cleaning stuff in Oxiclean is great for getting rid of stains, but if it sits on your clothes for ages, it can start to break down the fibers.
Yes, you can add detergent to the load as well as oxyclean and it will boost the performance of your favorite kind.
Reaction between Vinegar & Rust
Applying vinegar to rust dissolves the oxide and leaves behind a water-soluble salt that you can remove easily. It is called neutralisation, and this reaction happens between rust and acetic acid, which is why cleaning vinegar helps remove iron oxides from household surfaces and objects.
Best rust remover overall
Of all the rust dissolvers we tested, Rust 911 is the only one that's offered in a concentrated formula. The best rust remover mixes with water at a rate of 8 ounces per gallon, or a 16-to-1 ratio, meaning there's enough in our 32-ounce sample to create 4 gallons of finished rust dissolver.
Dawn dish soap is tough on grease, and rust stains, too
Dish soap is a necessity for cleanup. It also might be enough to clean rust off tools all by itself.
Don't soak metals in OxiClean.
You can use it to clean some metals, but if you do, rinse the item immediately. Soaking metal in an OxiClean solution could corrode or damage some metal materials. That also means you should avoid using metal bowls or containers to mix or apply OxiClean to other things.
Can hydrogen peroxide remove rust? Yes! Simply add equal parts of hydrogen peroxide and cream of tartar to create a thick paste before applying it to the rusted area. Let it sit for 30 minutes before buffing the area with a damp sponge and patting it dry with a paper towel.
Oxiclean is a mix od sodium carbonate, bicarbonate and hydrogen peroxide. Adding acid (like vinegar) just decomposes this mixture into carbon dioxide and oxygen (along with sodium acetate and water).
Rinse stain in cold water. Spray OxiClean™ Max Force™ Spray directly onto the set-in stain until the area is fully saturated. Let stand for 5 minutes or up to a week, depending on the severity of the stain. For set-in stains, allow the spray to penetrate overnight or up to a week.
It is always best to thoroughly rinse areas with clean water where OxiClean™ Versatile Stain Remover came in contact with plants, to wash away any residual product.
Description. One of the active ingredients in OxiClean is sodium percarbonate (Na2CO3•H2O2), an adduct of sodium carbonate (Na2CO3) and hydrogen peroxide (H2O2). This breaks down into hydrogen peroxide when dissolved in water. These ingredients break down safely in the environment and leave no toxic byproducts.
Church & Dwight Co., the parent company of Arm & Hammer and OxiClean, is raising prices to offset higher input and transportation costs. The Ewing, New Jersey-based household products company will soon announce price hikes for 30% of its portfolio that will go into effect in the first quarter of next year.
For stubborn rust, citric acid may be the way to go. Make a paste using two parts baking soda and one part lemon juice, and then apply the paste to the rusty area using a sponge and allow to sit for at least 30 minutes. Use a brush or steel wool to scrub away the rust from the metal.
WD-40 Specialist® Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing. Great for removing rust from tools, metal, cast iron, chrome parts, and more without harming paint, gaskets, trim, or other surrounding parts.
If you're looking for an easy-to-use homemade rust remover, vinegar and salt or baking soda will do the trick. According to a University of Hawaii study, the acetic acid in vinegar is an effective rust remover.