Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout. Just mix half a cup of baking soda with a quarter-cup of hydrogen peroxide and apply the paste to your tile grout with a brush. Wait five minutes for the stains to lift and the grout to whiten before rinsing.
To clean your grout, combine one-part 3% hydrogen peroxide and one-part water into a spray bottle. Spray your grout generously and let the solution sit for about 1 hour, to allow time to work. Rinse the area with water and wipe clean with a microfibre cloth.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Hydrogen peroxide is our transition into gradual cleaning, because we now have daily cleaners that leave no residue and gradually deep clean the grout lines. These cleaning chemicals utilize hydrogen peroxide in their formulations to boost cleaning performance without damage to the grout.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio.
Fill your spray bottle with a 1:1 solution of vinegar and water and spray the work area generously. Let the solution sit for about five minutes, then follow up with a grout brush or a scrub brush. If you don't have one of these, a toothbrush works in a pinch. Rinse with warm water.
Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout. Just mix half a cup of baking soda with a quarter-cup of hydrogen peroxide and apply the paste to your tile grout with a brush. Wait five minutes for the stains to lift and the grout to whiten before rinsing.
Dawn and Vinegar Grout Cleaner
Heat a cup of 1-to-1 vinegar and water in the microwave for about a minute. Pour it into a spray bottle and add a cup of Dawn dish soap. Carefully spray the mixture on your grout lines. Let it sit for 5-10 minutes longer if you have really dirty grout.
Clean floor grout using hydrogen peroxide
One way to clean grout without scrubbing is by mixing hydrogen peroxide and baking soda. Add 1/2 cup of baking soda to 1/4 cup hydrogen peroxide and mix into a paste. Follow with a teaspoon of dish soap. Apply the mixture to your floor grout and let it sit for 5–10 minutes.
Hydrogen peroxide oxidizes compounds that are common in organic life, which disinfects surfaces. It dissolves proteins by breaking apart and releasing water and oxygen-free radicals. When the water and oxygen are released, it creates a fizzy foam.
Don't mix hydrogen peroxide and vinegar together in the same mixture. This can create peracetic acid, which may be toxic and can irritate your throat and lungs, eyes and skin. You can, however, alternate spraying hydrogen peroxide and vinegar on a surface. Just make sure to wipe the surface between sprays.
Avoid Vinegar and Baking Soda
Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone. Another widely praised household cleaner, baking soda, is alkaline (not acid), but it is not very effective as a grout cleaner.
The Tile and Grout Cleaner Results
Baking soda is mildly abrasive so it helps to remove the dirt that is stuck in the porous grout surfaces without causing any damage. Hydrogen peroxide is a natural alternative to bleach that brightens and eliminates germs. Plus it is non-toxic and decomposes into water and oxygen.
Mix Cleaning Solution
To remove everyday dirt and debris, mix two parts baking soda with one part water. For stained or discolored grout, mix two parts baking soda with one part vinegar. And if you have coarse or fragile tiles, mix two parts baking soda with one part hydrogen peroxide.
Add Hydrogen Peroxide and Dish Soap
A good ratio is ½ cup baking soda, ¼ cup hydrogen peroxide and one teaspoon dish soap. When you apply your mix, let it sit on the grout for about 10 minutes. This allows the mixture some time to loosen the dirt. Then gently scrub and wipe the surface clean with a damp cloth.
Pour some hydrogen peroxide solution
This product is available in most drug stores, and you can use it directly or combine baking soda and hydrogen peroxide to make a paste, which is safer for unsealed and sealed grout.
Simply splodge some whitening toothpaste onto the old toothbrush or scrubbing brush and work it into the grout and edges of the tiles. This should help remove any black marks and restore the grout to a light white colour.
Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. It's a great bathroom cleaner and grout cleanser.
Oxygen-based bleach (hydrogen peroxide, sodium percarbonate or sodium perborate) and washing soda are safer alternatives to consider when you're looking for a powerful indoor cleaning solution. They're notably more eco-friendly and treat and prevent the growth of mold in a really effective way.