Most Home Depot's have an associate on staff that can rekey door locks. Call your local Home Depot and make sure that the person that does the rekeying
If you want to rekey a lock to match an existing key, the process is similar to standard rekeying but requires careful pin selection. You'll need to use a key decoder or take the existing key to a locksmith to determine the correct pin sizes.
The average cost of hiring a locksmith ranges from $100 to $200. The average homeowner spends around $150 to rekey a more complicated house lock like a profile cylinder or 3-point lock system and replace a set of keys.
Due to the extremely low price of the key pins in the locks, rekeying is almost always much cheaper than getting your locks changed.
Can I have every lock in my home Keyed Alike? As long every lock in your home is the same type then yes. If your locks are different, they will have to be changed in order to use the same keys for all of them.
A: Yes. Most Home Depot's have an associate on staff that can rekey door locks. Call your local Home Depot and make sure that the person that does the rekeying service is there before you arrive.
You can also buy the locks directly from the locksmith and they can just come keyed the same to begin with, as long as you remember to specify they should. If you are buying new locks for a house you just bought, you can just have the locks rekeyed, instead of buying new.
Lowes won't rekey an old lock you carry in, you have to buy it right there. ... unless you get an employee in a good mood that feels like helping. They use the 5 digit code on your key to know what pins to put in the lock.
If you know the brand or keyhole style of your locks, you may be able to buy a lock rekeying kit from your local home hardware store. But while you might have the tools to change locks, rekeying them can require special—and expensive—tools. You can buy them as a kit, then follow the instructions.
We rekey Kwikset and Schlage locks at a fraction of the price of having to replace your locksets. We can also create a 'master key' for superintendents or landlords that need access to multiple units without carrying a hundred keys. We also key Masterlock padlocks to an existing Masterlock key.
A rekey service can take between 10 and 40 minutes per lock. Rekeying only applied to keyed security locks, and not to privacy locks found on bathroom and bedroom doorknobs. New lock installation or replacement can take 30-60 minutes per lock, which is one reason that lock replacement is more expensive.
Life Pro Tip - If you move into a new house or are just looking to replace locks on your doors, you can take your existing locks out of your doors and get them rekeyed at a hardware store (Home Depot or Lowes) for <$10. This works for most of the common lock manufacturers (Shlage or Kwikset).
Changing a Yale lock typically costs around £100 during normal business hours. If it's an emergency, most locksmiths will charge a call-out fee ranging from £50 to £150. These figures represent typical costs, but the actual cost of your lock replacement project may vary based on several crucial factors.
If you want the key for your new lock to match your other locks, make a note of the current brands installed on your doors and bring in your existing key to The Home Depot. Store associates will help you select a lock that is compatible with the existing key.
To rekey locks, you or a handyman professional have to remove the key cores from the locking hardware and replace them with lock patterns that match new keys. This sounds simple but actually is time-consuming and can get costly, as you have to pay for labor and buy new equipment.
Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key. Navigating your way through the Kit tray.
To change a lock so that it fits an existing key, you simply work in the opposite direction: You change the pattern of the pins in the lock so that it matches the pattern of notches in the key. If the lock is designed with a universal keying system, any locksmith can re-key the lock in no time.
Rekeying a lock is a common task for a locksmith, and this simple project only takes about 30 minutes to complete. The only tools you'll need to rekey your lock yourself are a rekey kit and the current key to the lock. This saves considerable money, especially when you need to access multiple locks with the same key.
Most modern locks can be rekeyed, some more easily than others, often by your neighborhood hardware store. (I have even rekeyed locks myself.) Make a note of the make and look for someplace that sells them. You can also call a locksmith and have them take a look at them.
Purchase a Rekeying Kit
You can use the same key for each regardless of brand. The rekeying kit comes with everything you need to complete this task, such as tiny picks and tweezers, a key gauge, an assortment of pins and springs, and any other tools you'll need to disassemble and reassemble the lock.
Many professional locksmiths can rekey locks, which involves removing and replacing existing springs and pins so that old lock keys no longer work and new keys will. The cost of having locks rekeyed ranges from $40-$100, plus $5-$25 for each lock cylinder.
Yes, it is possible for you to rekey a lock without the original key. A locksmith can change your locks even if you have lost or misplaced the original key. In general, it is possible to pick or shim the lock and unlock the door. Then, the locksmith will have a much easier time removing the lock cylinder.
You must buy a kit for each brand of lock in your home. (If you're lucky, they'll all be the same brand!) Each kit will re-key six locks, but you can order extra pins if you need to do more. The kit will work on entrance and deadbolt locks, and it comes with two keys and all the tools you'll need except a screwdriver.
Rekeying is the least expensive method, but you will need to replace the entire lock if the only key to it goes missing.
Find the key cut number on your new key, a series of numbers used to indicate the cuts or depth of your key. Insert the new key into the cylinder and locate the right pins of your lock using the rekey kit map, matching it to the key cut number. Insert the correct numbered pin into their corresponding holes.