Clorox Pool & Spa Super Water Clarifier works fast to keep your pool water clear and sparkling all year long. Its concentrated formula actually works well on algae growth too!
The only thing that kills algae is CHLORINE (or your sanitizing product, or one of the copper-based algaecides on the market). You need to raise the level of your chlorine – shock the pool – and maintain that high level until all the algae is dead. This may take 3 to 4 days. RUN THE FILTER 24 HOURS A DAY.
Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there's not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Pool Clarifiers are not meant to be used all season long, but are quite helpful at pool opening, after an algae bloom, or battles with cloudy pool water. Follow label directions, but most pools can be retreated after 5-7 days, with a lower dosage than initially used.
Once the clarifier has been added to your pool, turn on the pool filter and run it 24/7 until the cloudiness is gone. This can take two to three days, but swimming in the pool at this time is safe after about 20 minutes.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
It's not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It's best to shock your pool before and wait a day or two before adding clarifier.
What happens when you add too much clarifier is that all the little particles clump together too much an end up as a colloidal suspension. When that happens, the whole thing turns cloudy. It'll clear but it will take a while. Run the filter 24/7 until is clears.
Some of the best natural homemade pool clarifiers include baking soda solution, bleach, white vinegar, lemon juice, rubbing alcohol and borax. Compared to commercial chemical clarifiers natural ones have enzymes that break down the dirt in the water making it easy and cheap to filter them out.
To maintain a clear sparkling pool add 4 fluid ounces of Water Clarifier per 10,000 gallons of water weekly. If the pool is cloudy due to dust or to high hardness of the water, add 32 fluid ounces of Water Clarifier per 10,000 gallons of pool water.
8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim.
Depending on how cloudy your water is, it may take 2-3 days for your water to clear. If you're using a clarifier, you'll need to run your filter 24/7, keep your water chemistry balanced, and add the proper amount of water clarifier every other day until it's clear.
If your pool has been green all season you're probably super excited to close it. While it seems like the easiest option – it's not! It's much smarter to close your pool as clean as possible. Algae can grow in water as cold as 50 degrees.
While the green algae aren't harmful, the bacteria that feed on the algae can cause issues. When you swim in green water, you expose yourself to algae that host bacteria. Swimming in green water could cause bacterial infections on your skin, and you could get sick if you ingest algae-filled pool water.
If there's not enough chlorine, your pool can turn green. pH Value too high. - pH is a measure of how acidic or basic the water is. A number of different factors can contribute to a high pH level in a swimming pool.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Not to worry, this is normal and should resolve itself in a day or so as the chlorine level drops. Just keep your filter running in the meantime. If it doesn't clear up, either your filter-system is compromised, the rest of your water chemistry is out of whack, or you're using some cheap-ass, low-grade shock.
The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.