Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
If vinegar does not do the trick, you can also try mixing about a cup of bleach for each gallon of water and using this as your mold-killing spray solution.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Apply the bleach and water to the wet paving slabs
Brush the solution to make sure you get an equal coverage of the cleaner. Make sure you brush the cleaner into all corners of the paving slabs. Once applied leave the cleaner on the surface for 10 -15 minutes.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
You can't cover your patio with copper sheets, but you can spray on a liquid solution of copper that will soak into the top surface of the concrete pavers. This copper will stop the growth of the pesky green and black organisms in their tracks. The easiest way to apply the copper is to buy copper sulfate crystals.
Only algaecides can "kill" algae in pool water. However, baking soda can help clear up algae. Use both so you can restore sparkly, clean water!
The best way to control moss on your pavers is to keep them clean, dry, and wash them several times a season. You can treat them regularly with a 10-15% bleach solution as a preventative measure. Although sealing your pavers will not prevent moss, it can limit the amount of moisture in the pavers and joints.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.
You can use a pressure washer on your patio pavers if you want to clean stubborn stains or mildew from them. However, be very careful when doing this! Use a gentle spray and avoid letting the water run down the sides of your pavers, especially if they're set in the sand rather than mortar.
Salt should not be applied to walks or patios, regardless of whether your walks and patios are natural stone, pavers, or concrete because salt will damage all surfaces other than asphalt. So, you wonder, why is this and what should you use instead? We have the answers for you here.
Baking soda has low-abrasive properties, making it an excellent cleaning material for stuck-on grime and tough stains. Additionally, baking soda is absorbent, allowing it to absorb oils from the surface of the pavers, especially freshly oil spill on concrete pavers.
You may also use Oxyclean mixed 4 scoops to a gallon of hot water. Let soak for 15 minutes and then scrub with a nylon bristle brush, then rinse. Caulking - Scrape off excess and scrub with a poultice of denatured alcohol. Rinse with hot water and detergent.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '