There are plenty of DIY natural remedies out there, but we find that the best hard water stain remover is a paste of white vinegar and baking soda. Spread over affected surfaces, let it sit for 30 minutes, then wipe clean with a dry microfiber cloth to quickly brighten bathroom surfaces.
A paste of baking soda and hydrogen peroxide cuts through soap scum and hard water stains on tubs and tiles.
Mix equal parts lemon juice and distilled white vinegar in a spray bottle. Spray the vinegar and lemon juice stain remover on the stain. Let the cleaning solution work on the stain for about five minutes. Use a microfiber cloth to rub the stained area until the stain is gone.
Which natural detergent comes out on top? Well, that would depend on its intended use. For instance, vinegar is potent at fighting mold while baking soda is great at fighting wine and coffee stains. The former is a better disinfectant but the latter is a phenomenal deodorizer.
The acetic acid in vinegar acts as a disinfectant and reacts with the baking soda to lift stains. This combination is also great for brightening whites. With a little bit of scrubbing and leaving the paste to set for 30 minutes, I was able to almost remove the stains completely from my white jeans.
Simply sprinkle baking soda onto a wet stain, leave it overnight and you'll be surprised by the results. Not only will the stain likely be gone, but so too will any related odors – no need for an additional paste. As long as you cover the entire area of the stain with baking soda, it should do the trick!
Clean the grime off your tub, shower or tiles
Use Dawn and some hot water and a cloth or sponge to get into those nooks and crannies where grime and scale tend to build up. You can also combine Dawn with vinegar for stronger cleaning power, especially when tackling hard water stains.
Grab a spray bottle and mix equal parts water and vinegar (you can also add a teaspoon of Dawn dish soap for more clinging power). Spray the solution on the bathtub stains, let it sit for at least 15 minutes, then wipe clean. Let the solution sit longer depending on the severity of the stains.
For really tough hard water stains, try scrubbing with some hydrogen peroxide. Yep, the same stuff you have in your first aid kit. Hydrogen peroxide plus some elbow grease should banish even the most stubborn of hard water spots from your metal fixtures.
These hard water stains are not permanent; however, if they're allowed to build up over time, you could end up with layers of scale in your bathroom plumbing or around the valves of your dishwasher which could lead to costly repairs down the line.
Hard water deposits are alkaline, so an acid-based cleaner is the best way to clean them. Phosphoric acid works well and is safe for most surfaces. Grocery store cleansers with phosphoric acid contain 4 to 6 percent acid.
Yes. The acid in coke will help to dissolve limescale and there are several examples of it being used to clean toilets, descale kettles and in other circumstances.
Professional window cleaners like Window Genie are trained and experienced in this battle. Window Genie uses a polishing paste specifically designed to fight the minerals that create these stains. The paste is applied to a non-abrasive cleaning pad and the window is lightly scrubbed.
But common pantry essentials that are often used for cleaning — like baking soda and vinegar — shouldn't be mixed either. Unlike the bleach-ammonia mixture, combining soda and vinegar won't hurt anyone — but don't expect the mixture to do a good job cleaning, either.
Regular glass cleaner won't help at all. We tried both Windex-style ammonia-based window cleaner, and also vinegar-based auto glass cleaner and found that neither has any effect on the stains.
Tired of stinky, retail cleaners? Try this: Vinegar Cleaner: 1 tsp baking soda 1 tsp Dawn dish soap 1 tbsp white vinegar Directions: Fill spray bottle with water. Add Dawn. Add baking soda.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
Removing Hard Water Deposits From Faucets
Use vinegar to help loosen the hard water film and buildup before scrubbing. Soak a clean rag in vinegar and drape it over the faucet, making sure there is direct contact with all of the hard water deposits. Let the rag sit for at least 30 minutes; an hour is better.
If you want to try removing hard water spots on windows yourself, here are some tricks that may work: Rubbing Alcohol: To remove mild hard water spots on windows, mix one part water with one part rubbing alcohol and apply it to the glass with a soft cloth. Be sure to dry the window when finished.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too. Always make sure to test new cleaning products on inconspicuous areas of surfaces first.
Another popular use of baking soda is to mix it with water to create a thick paste to remove food and drink stains from coloured clothes, white clothes, carpets, and mattresses. In fact, some people take it as far as using baking soda to remove stains from their teeth!
Baking soda is most effective as a stain remover when mixed with water and used as a paste. The paste helps draw a stain out of fabric and essentially "traps" pigment and odor in the baking soda. As the paste dries, it pulls more and more of the stain from the fabric.
Baking powder is not as effective as baking soda for removing stains. The reason is that baking powder contains both an acid and a base, neutralising its reactivity – the property that gives baking soda its cleaning power. That said, baking powder can still be used for light cleaning tasks or minor stains.
When you are using a baking soda and vinegar solution to clean out your drain, you are actually causing the rubber and plastic that are used for the drain's pipes to be eaten away by the mixture. Over time, this rubber and plastic will break down, causing the drain to become even more blocked.