One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
So, if you run your pool pump for 8 hours in one day, 1,864.25 multiplied by 8 and divided by 1,000 equals 14.9 kilowatt-hours. If you run your pump every day for an average of 30 days per month – 30 multiplied by 14.9 – your pump uses 447 kilowatt-hours in a month.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
That's around 24 kWh per day, or around 720 kWh per month, just running only 10 hors per day. During the heat of the summer, many pumps need to run longer to maintain clear water. And remember, pool pumps never get to take a day off.
$1.36 per day x 365 days = $496 per year to Operate a 1-½ HP Variable Speed Pump. Cost to Operate 1-½ HP Single Speed Pool Pump $1,062 / yr Vs. Cost of Variable Speed Pump $496 / year.
On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.
For an air/water heat pump, the average cost of consumption per season is € 2.50 to € 3.70 per m3 heated in the pool. Good to know: a heat pump consumes 50 Wh when it is turned on but not heating, in other words 1.2 kWh in a day without heating the pool.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
The water moving around helps protect the chlorine from being burnt out from the sun. If you run your pump during the night, then the sun has all day to attack the chlorine that's standing still in your pool. That can cause algae fast! It's a great idea to have the pump running when people are using the pool.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
On average, pool pumps last eight to 12 years before needing replacement. Over time, it's normal for pool parts to begin to wear down. In addition, swimming pool technology has come a long way in the last decade.
TriStar® VS variable speed pool pumps are the most energy efficient on the market, according to EPA ENERGY STAR 3rd party testing data. Saving pool owners up to 90% on energy costs, they are specifically designed to replace most single speed pool pumps.
On average you'll need between $200 to $500 to run it monthly with a pool cover. Electric heat pumps from trusted brands can last between 10 and 20 years. They're energy-efficient, and their use of surrounding air qualifies them as one of the most energy-efficient heating systems.
Heat pumps cost about $3600.00 and gas heaters are in the $ 2300.00 – 2900.00 range fully installed. If you have questions on heating your pool or need help sizing the correct heater for your pool, feel free to give us a call at 1-813-375-9309 and we would be happy to help.
How much electricity does a heat pump use? Heat pumps use anywhere from 802 watts to 5,102 watts (that is between 0,802 kWh to 5.102 kWh per hour), costing anywhere from $0.10 to $0.98 per hour to run.