Does a new fridge need to stand for 24 hours?

Author: Prof. Jane Osinski  |  Last update: Sunday, March 30, 2025

Your refrigerator should be left in an upright position when being moved or stored to prevent damage to its cooling mechanism. If it must be transported on its side, leave it for no more than 8 hours and do not plug it in for at least 24 hours after arriving at its installation location.

Do you have to wait 24 hours before turning a fridge on?

To keep your fridge or freezer working properly, it's recommended to wait a few hours, at least 4-6 hours, before plugging it in after it's been moved. This allows the compressor oil, which lubricates the internal components, to settle back into place.

Do you have to wait 24 hours to use a fridge?

A fridge with a standard compressor typically needs four hours before you plug it in. However, side-by-side or French door fridges that have dual evaporators or more zones may need 24 hours or more to settle. If you have a standard compressor fridge, you may wonder why you need to wait four hours before plugging it in.

How long does a new fridge need to be standing?

Once your fridge has been safely moved into the desired position, it needs time to settle. As aforementioned, you should leave the appliance to stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle. Once 4 hours have passed, you can plug your appliance in.

How long after getting a new fridge can it be used?

After transporting a new refrigerator, it's generally recommended to wait 2 to 24 hours before plugging it in. This allows the refrigerant to settle back into the compressor and ensures optimal performance.

How long should I wait before plugging in my fridge after moving it?

How long to let a new fridge sit before plugging in?

Allow your refrigerator to sit in place for 12 to 24 hours before plugging it in to allow the refrigerator to settle.

How long after plugging in a new fridge can you put food in it?

How long should I wait after plugging in the refrigerator before putting food in? After plugging the refrigerator in, wait two to four hours and verify that the unit is cooling before putting food inside. Only add food to the freezer once the freezer temperature is below 0°F (-18°C).

What are the rules for a new refrigerator?

Once you have received your new refrigerator it is best to let it sit for at 4 hours before you turn it one. This needs to be done to let the gas and lubricants settle back into the compressor again. You will then need to wait for your refrigerator to come to temperature before you start to use it.

How long does it take refrigerant to settle?

Installing a new air conditioner is exciting, but you must allow it to settle before turning it on. Although an air conditioner can be set in as little as 30 minutes, this is not always the case. The freon in an AC can settle in 22 minutes on average, but it can take up to 24 hours in some cases.

How long does it take for a new fridge to get cold?

Owners should wait at least 24 hours for a new refrigerator to fully cool down before loading it with perishable items.

Why does a fridge take 24 hours to cool?

The time it takes for your fridge to cool is impacted by many things. A few of the most important factors include: Size: Generally, the larger the unit, the longer it will take to cool. Storage Temperature: A unit stored in a warm location or delivered in a warm compartment will take longer to cool.

How long do you have to wait to put food in a new Frigidaire refrigerator?

It takes about 12-24 hours to get down to temperature so most likely there is nothing wrong, you just need to give it more time. The unit cools down in 12 hours without any food inside. If you put food inside, then it can take up to 24 hours to get down to temperature. It will run constantly for the first 24 hours.

How long after laying a fridge down can you use it?

After Transporting Your Refrigerator

If it was on its side for more than a day, leave it standing upright for 24 hours before running the refrigerator. If laying on its side just briefly to service, clean or adjust, just a few minutes of stand time will be enough.

Can fridge be off for 24 hours?

The refrigerator will keep food cold for about 4 hours if it is unopened. A full freezer will keep the temperature for approximately 48 hours (24 hours if it is half full) if the door remains closed.

How long do you have to wait to put food in a new LG refrigerator?

Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use. Be careful when you work with hinge, base grille, stopper etc.

How much is a fridge gas refill?

Fridge freezers repair and gas refilling on-site ,R400 for gas refill. 0646213749 call or WhatsApp Lesley for assistance.

How long should I let my new fridge settle?

Once your fridge has been safely moved into the kitchen of your new home and is in the desired position, you should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle.

When can I put food in my new fridge freezer?

You can put food in your new fridge freezer after letting it settle for 4 hours if it was transported on its side or 1 hour if it was transported upright. After this amount of time you're absolutely fine and safe to put your food in your new fridge freezer.

Why do you have to wait to put food in a new refrigerator?

This allows time for the refrigerator to achieve the following: Correct Internal temperature. Properly chilled water. First batches of ice production.

What is the first thing you should do with a new fridge?

Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.

Do you have to let a new refrigerator sit after moving?

If it is transported upright, wait at least two to three hours before plugging it in. If transported on its side, turn it upright and let it stand for at least four hours.

How long do you have to leave the refrigerator off before you move it?

If you're moving a fridge or freezer into your new home, it's best to turn it off 24 hours before. This gives the fridge's evaporator time to defrost, which reduces the risk of any damage during the move. It also lets the oils and fluids inside settle and stops them moving through the compressor.

How long does it take a new refrigerator to get cold to put food in?

Mini Fridge – depending on the brand should not take more than 4 hours. Top-freezer fridge – depending on the brand will take 4 hours to 24 hours. French door fridge – depending on the brand will take 2 hours to 24 hours. Side-by-side fridge – depending on the brand will take 2 hours to 24 hours.

How long after moving a fridge can you turn it on?

Essential Waiting Period for Optimal Performance

Many people wonder how long to leave fridge after moving. It's important to plan ahead and consult your user manual for specific guidance. After moving a fridge, it's best to let it stand upright and stand unplugged for at least four hours before turning it on.

How long does it take for water to dispense from a new fridge?

How soon will the water dispenser work after my fridge has been installed? Allow 24 hours for the refrigerator to cool down so that it can chill water properly. Also, the water dispenser needs to have the trapped air in the water line removed when it is first connected or every time the water filter is replaced.

Previous article
How long does cockroach spray last?
Next article
How long do engineered hardwood floors last?