But when it comes to upgrading your shower routine to make it feel a bit more special, think beyond just the products you're using — like changing out the hardware in the shower itself. Swapping out a run-of-the-mill shower head can make a huge difference when it comes to your time spent under the spray.
Replacing your showerhead: If limescale build-up has clogged your showerhead or hose beyond repair, it might be time for a new showerhead. The fewer and finer the holes are in the head, the stronger the water flow will feel. Try experimenting with an adjustable showerhead that gives you various spray options.
A jet shower head is more powerful and the pressure is directed towards a smaller surface area. A rain shower head takes a more natural approach and is designed to give you the sensation of showering in rainfall. Many have different pressure settings so you can determine how powerful you want your shower to be.
Not every home has high enough pressure to accommodate high-pressure heads. Lower levels of water pressure can affect your shower head's power. If you have low pressure, look for a shower head designed for low water pressure. While they use less water, they still provide a full shower experience.
When shopping for shower heads, be sure to compare “apples to apples.” A 2.0 GPM shower head simply will not reproduce the flow rate of your old, 3.5 GPM shower head. Know the Laws. Depending on where you live, retailers may only sell shower heads with a maximum of 2.5 GPM, 2.0 GPM, or 1.8 GPM flow rate.
If you're looking for the most pressure, go for the 2.5 GPM Flow Rate, unless you are restricted because you reside in California, Colorado or New York. Again, this has been the Maximum Flow Rate since 1992.
Square shower heads work best in contemporary bathrooms with angular elements, such as a square bathtub. Round shower heads tend to complement traditional bathroom styles. Ultimately, it's your choice, but these are things to consider when making your decision.
Low-flow shower heads use less than 2.5 gallons per minute (gpm), saving energy and money. Some models come with a cut-off valve that allows you to stop the flow of water, reducing the amount of water used in every shower.
Warm-up efficiency is bad for low-flow shower heads.
Well, it is definitely not your plumbing, it's the shower head. This is sadly a reality for low-flow showers as they take longer to pull the hot water from your tank and it consumes more energy and water than you think.
Many people don't realize it, but shower heads should actually be replaced every 6 to 8 months.
If you have high pressure (achieved with or without a pump), you will get a better flow rate and can consider big rain heads, body jets and the ability to have two or more taps or showers on at the same time. A high pressure system will work well with a mixer, electric or digital shower.
showers don't last very long like they used to do. I have fitted replacement showers for many years now and noticed the trend towards returning customers asking for replacements within 2 - 4 years. 1 Entry level showers are cheap to buy and made to sell cheap - So manufacturers make these for market share.
While it is possible to remove flow restrictors from shower heads, we strongly advise against it for several reasons. Flow restrictors for faucets are an integral part of most aerators and it is generally not possible or desirable to remove them.
A quick and easy way to increase water pressure is to adjust the pressure-reducing valve, which can be found in your home, usually close to your water meter.
Square & Rectangular
Clean lines make square shower heads ideal for a contemporary bathroom. This style delivers a rainfall experience because of its wide, flat shape. Similar to square shower heads, rectangular shower heads deliver a rainfall experience and have a modern look.
Hotel Anystream with Adjustable Showerhead
Featured in luxury resorts around the globe, the Speakman Hotel Showerhead is known for its legendary performance and unrivaled quality. Equipped with 50 full-coverage sprays and 8 center massage jets - this fixture is engineered to deliver a truly satisfying experience.
With a generous surface, rain shower heads feature a steady, even water flow that emulates rainfall. They do this by using all nozzles for a balanced, soft, and luxurious spray. Usually installed in the centre of your shower they provide fantastic maximum coverage.
Because they're so much bigger than the average showerhead, but still provide the same amount of water (which can vary by water-saving mandate depending on where you live), it's just math: The same amount of water delivered across a bigger surface = less pressure. That's not the only drawback.
This may happen for several reasons, including heat sensitivity, the energy it takes to perform a simple task like this, how your nerves respond to the water flow, and even an abnormal drop in blood pressure.
Low pressure in a shower can be caused by several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater.
Why Does My Showerhead Have No Pressure? If you've just installed a brand-new showerhead and find that the pressure is suddenly lower, it's probably because you've purchased a water-saving showerhead. Check the labels around the rim, or perform the showerhead GPM test as described below.