Do you sharpen or hone first?

Editorial team Published on

Always sharpen first, then hone.

Should you hone before or after sharpening?

Remember to always hone after sharpening

Sharpening creates a fresh edge, but honing smooths and aligns it for optimal cutting and longer-lasting sharpness.

What is the correct order of sharpening steps?

The correct order of sharpening steps relies on a systematic progression from coarse abrasives to fine polish. Whether sharpening a knife or a woodworking tool, the goal is to establish the correct bevel angle, create an edge, and remove microscopic metal folds (burrs).

Can you use your knife immediately after honing?

Technically speaking, it's better to hone right before using a knife than after—the reason being that if a large amount of time has elapsed between honing and use, the knife can regress some and the edge bend back out a bit. But it's no biggie.

What is the golden rule for knives?

The golden rule of knives is simple: A sharp knife is much safer than a dull knife.

What Do "Knife Sharpening" Honing Steels Actually Do?

What is the Holy Trinity of knives?

The "holy trinity of knives" refers to either the foundational trio of folding pocket knives that defined the high-end knife industry, or the three essential blades every kitchen needs.

What are the three basic knives you should have in your kitchen?

To better understand why the chef's knife, paring knife, and bread knife are each greater than the sum of their parts, let's break down these all-purpose kitchen companions a little further.

How many swipes to hone a knife?

Generally, 3 to 6 swipes per side (alternating sides) is sufficient to hone a knife, totaling about 6–12 strokes. Honing realigns the edge rather than removing significant metal, so light pressure is key, keeping the blade at a 15–20 degree angle to the steel.

Is WD-40 good for sharpening knives?

While WD-40 can act as a quick, last-resort lubricant or cleaner for sharpening stones, it is not recommended for the job. It is too thin to properly float away metal shavings, and it leaves behind a residue that can clog stones or cause blades to skate across the surface.

What dulls a knife the fastest?

The fastest way to dull a knife is by cutting on ultra-hard surfaces like glass, granite, ceramic, or directly on dinner plates. Because these materials are harder than the knife steel, repeated impacts cause microscopic edge rolling, chipping, and catastrophic dulling in just a few uses.

What are common sharpening mistakes?

Common sharpening mistakes include fluctuating the blade angle, applying too much downward pressure, using the wrong stone grit (like starting with a fine stone on a dull knife), and failing to properly flatten the sharpening stone. These errors prevent the blade from forming a proper apex, resulting in an inconsistent or dull edge.

Do pull-through sharpeners ruin knives?

Yes, pull-through sharpeners will eventually ruin good knives. While they are convenient for a quick fix on cheap, everyday blades, their aggressive carbide wheels shave off excessive metal, ruin the blade's original shape, and create a jagged edge rather than a truly polished one.

When sharpening a knife, do you push or pull?

You can do both. Which motion you use depends on the sharpening tool you are working with:

How often should I hone vs. sharpen?

Unlike sharpening, honing does not remove pieces from the knife and instead works to realign the tines of a sharpened blade, helping it cut better and feel sharper. Because of this, it should be performed more frequently than sharpening. In general, honing should be done every two to three times a knife is used.

Can WD-40 be used as honing oil?

Yes, you can use WD-40 as a honing or sharpening oil in a pinch, but it is not the most ideal option. It works well to float away metal shavings and keep the stone clean, but its extremely thin viscosity and quick evaporation mean you will have to reapply it constantly.

Why does honing not actually make the knife sharper?

Honing realigns the edge. It doesn't remove metal. A honing rod (steel or ceramic) straightens the microscopic teeth on the blade's edge that have rolled or bent during normal use. Honing keeps a sharp knife performing as if it were freshly sharpened, without actually re-sharpening it.

What is the best lubricant for knives?

The "best" lubricant depends on how you use your knife. For general-purpose pocket knives, synthetic lubricants like Knife Pivot Lube (KPL) Original or Benchmade BlueLube are top-tier choices because they suspend grit and won't evaporate. For everyday carry (EDC) blades, dry lubricants like Sentry Tuf-Glide are excellent to prevent pocket lint from gumming up the pivot.

What does Gordon Ramsay use to sharpen his knives?

Gordon Ramsay uses a honing steel (also called a honing rod or sharpening steel) to maintain and straighten his blades before every use. For heavier maintenance, professional chefs also rely on whetstones or modern rolling sharpeners (like the Tumbler Rolling Sharpener) to re-profile the edge when it goes dull.

What is the 3 finger test for knives?

The 3-finger test (popularized by bladesmith Murray Carter) is an advanced technique used to gauge a knife's sharpness and edge aggression. By gently resting your three fingers on the cutting edge and attempting to slide them along, you can feel how "grabby" the edge is and assess its condition.

How long will a honing steel last?

A high-quality honing steel can last a lifetime in a home kitchen and up to 10 years in a demanding professional environment. However, the lifespan varies drastically by the material of the rod and how it is maintained.

What is America's Test Kitchen's favorite knife?

Our longtime favorite is the Victorinox Swiss Army Fibrox Pro 8” Chef's Knife. It's lightweight and has a superkeen blade; testers of all hand sizes loved its grippy (but not restrictive) handle. If you'd like a slightly heavier option, we also like the Mercer Culinary Renaissance 8-Inch Forged Chef's Knife.

What knives should every chef own?

Yet despite all the talk about knives that goes on in both home and professional kitchens — and despite all the knives out there that are truly great to have — there are just three knives every kitchen ultimately needs: a chef's knife, a paring knife, and a bread knife.

Is a 6 or 8-inch chef's knife better?

The 8-inch chef's knife is the universal standard for versatility, offering the best balance of leverage, reach, and control for chopping most meats and vegetables. However, a 6-inch knife is better if you have smaller hands, limited counter space, or only prepare small meals.

← Previous article
How much is a basic bath fitter installation?
Next article →
Why do my bed sheets irritate my skin?