If you have a regular top-loading machine, it's best to fill your washer with water first, then add your detergent, then add your clothes. This helps evenly distribute the detergent in the water before it hits your clothes. Remember that the nicer you are to your washer and dryer the longer they'll last.
Instead, use this order to distribute detergent best: clothes, then water, then soap. This isn't necessarily a blunder. Most items that say “dry-clean” can be hand-washed and air-dried. This includes natural fibers, such as linen and most silks.
Step 2: Sort by color
Most people know that sorting laundry begins by separating white clothes from dark ones. However, some experts think that you should go even further and organize clothes by shades. Start by putting together a pile of clothes: Whites – no patterns or embroidery.
Do you pour liquid laundry detergent on top of clothes? When adding liquid laundry detergent to the drum of your washing machine, add it in first, followed by the clothes on top. This will help to ensure that it is evenly distributed once you turn the machine on and is not trapped in only one area.
Then, for best results and maximum color longevity, separate each pile into three smaller piles: white or light clothes, dark clothes, and colors. For patterned items (such as stripes, plaids, polka dots, and florals), sort based on the dominant color.
The powder detergent goes into the largest section of the drawer, usually on the left hand side. If in any doubt, check your washing machine's manual. The liquid softener goes into the partially covered section of the drawer with the flower symbol.
They probably recommend that so that the detergent has plenty of time to dissolve in the water and avoid staining or discoloring your clothes. The drum that holds your clothes rotates through a larger drum where the wash and rinse water is held.
Concentrated detergent is very caustic, and you shouldn't put it on clothes directly. However, what you can do in place of the dispenser if you don't have a door safety switch, is pour the detergent into the cap and hold it under the water during the fill cycle.
Liquid detergent requires the highest amount – usually two tablespoons, give or take, per load, or two teaspoons if you have a high-efficiency washing machine. With many powder formulas, the recommended amount is about a quarter of a cup.
If you accidentally forget to put laundry detergent into your machine before starting it, washing clothes at high temperatures may remove some water-soluble stains. However, the odour will still remain, and it may even intensify as the clothes dry because you haven't used any agents to remove them.
If it's a top loading washer, then it's perfectly fine to put the detergent in first and let it dissolve with the water running before putting in the clothes. To get the clothes as clean as possible, don't fill the washer more than 2/3 full, loosely filled.
Once the garments are submerged, allow them to soak in the solution for 15 to 60 minutes, depending on how visibly dirty the fabric is.
The short answer to your question is simply put a cap full of liquid detergent in your washer as it's filling up with water. The caps on liquid detergent plastic bottles are made precisely for that purpose. Just fill the cap from the bottle and dump it in.
New clothes can contain chemical irritants.
Many manufacturers include chemical finishes on clothes to enhance their texture and reduce wrinkles, which can irritate sensitive skin.
When using a top-load machine, add the detergent directly to the drum. For front-load machines, add the detergent directly to the detergent section of the dispenser. Detergent should be stored out of reach from children and pets and should always be kept in its original packaging.