If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.
If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and ``dry'' the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.
Don't neglect to rinse after mopping. Rinsing is an important, often overlooked final step. All cleaning products, no matter what they are, leave behind residue. Dirt, dust, grime, ect, is 'attractanted' to the residue, and 'binds' with it.
Once the surface is wet with the Pine-Sol, let stand for 10 minutes, and then rinse or wipe off with water.
Failing to rinse the floor properly after cleaning can leave behind detergent or cleaner residue. Make sure to rinse with clean water after using any cleaning solution. Using a dirty mop or not changing the cleaning water frequently enough can spread dirt and grime around, causing stickiness.
After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.
Warm Water Rinse
Mop the floor with warm water. Rinse with clean water to remove any leftover residue. This method is best for minor stickiness.
CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
While we recommend Pine-Sol® Original Multi-Surface Cleaner to clean germy kitchen and bathroom floors, feel free to dip your spin mop into any Pine-Sol® scent for your daily cleaning routine.
Is Pine-Sol Safe After It Dries? Yes, Pine-Sol is less harmful after it dries, but it's still a good idea to be cautious. Some residue can remain, especially on surfaces that your dog might lick or come into contact with.
It's easy to believe that, to make something clean, you need to use chemicals. Surely you can't clean a floor with only water - can you? The answer is yes: it's been proven that water is often enough to clean efficiently when used in conjunction with a good auto scrubber.
To ensure no residue is left, rinse one final time with clean water (don't add floor cleaners or soap).
Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.
Hot water is great for removing grease, stubborn dirt and caked-on residue. It is more effective in killing bacteria and germs. Hot water is a good choice for tile floors and vinyl. Be sure to check the manufacturer's instructions to make sure your floor is resistant to hot water.
Mix ¾ cup of bleach with 1 gallon of water. Then, clean your floors with a damp mop, and make sure you rinse the mop in hot water when it gets too dirty. Because you are using bleach, wash your hands with soap for 20 seconds after you finish cleaning your floors.
Pine Sol can be a useful deterrent, but it is generally less consistent than other pest control methods like traps, baits, and sealing entry points. While Pine Sol's strong scent can temporarily repel mice, it may not provide a long-term solution.
We do not recommend mixing any Pine-Sol® product with other cleaning products or chemicals.
May cause irritation of respiratory tract. Causes serious eye irritation. May cause irritation. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors.
Floor oversaturation and residue build-up often occur in the cleaning process. If the excess is not removed, the water will eventually evaporate, but the chemistries are left behind, creating a residue that can actually attract more soil and dull the surface.
What tile floor cleaners don't leave residue? In testing, we found that the Quick Shine Multi-Surface Floor Cleaner, Lysol Multi-Surface Cleaner, and Bona Multi-Surface Floor Cleaner Spray didn't leave residue after cleaning.
The process of changing a liquid into vapour is called evaporation. The water present on the mopped floor absorbs heat from the room and becomes vapour. This process dries up the room. Hence, mopped floor dries up due to evaporation of water.