Do you install the shower tray before or after tiling? A shower tray should be installed before you do the tiling.
Expert Recommendations. In a bathroom renovation, it's best to install the shower before the flooring. This ensures proper support and prevents potential damage to the flooring during installation.
It is recommended that all flat top shower trays are installed before tiling to ensure that the top radius of the tray is behind or at least below the tile face. This will help to create a water tight seal.
It is always better to fit tray first, siliconing to the wall and then tile down to the tray and seal again between the tray and the bottom row of tiles.
Shower Pan Install
A waterproof base is the foundation of any shower. Also known as the ""shower pan,"" this base requires precise measurements and proper slope to ensure efficient water drainage (and to prevent leaks).
We always advise fitting the shower tray before tiling the walls or installing wall panels as this ensures a more watertight seal around the sides of the tray.
A shower only setup benefits greatly from having your flooring installed first or concurrently as the shower tiles will generally be placed at the same time as the rest of your bathroom flooring. This means that you need only install the door and the faucet after your bathroom remodeling is complete.
While some guides may recommend tiling behind the shower walls, you should indeed tile on top of the tray.
Once your shower base has been waterproofed, it's time to lay the tiles. The most important thing is to maintain the fall of the floor, so the water drains away.
For low-profile shower trays that sit directly on the floor, you typically do not use cement. Instead, you create a mortar bed using a mixture of sand and cement to support the tray. However, for adjustable-height shower trays with legs, cement is not required, as they are adjustable and self-supporting. 3.
However, if you have the flooring installed first, it can easily get scratched, cracked, or even completely ruined by trying to place a heavy object such as a bathtub on it, so it's often best and more convenient to place the tub first and add the new flooring afterward.
It's placed under the tile floor of a shower.
Yes, vinyl flooring should go under the shower tray, as this will provide a solid, waterproof base which will prevent any water leakage. In order to install vinyl flooring under the shower tray, you will need to make sure that the surface of the floor is level and even.
Tiling the new floor will help prevent accidents if you decide to complete the shower floor first. To secure the fresh tiles, use fabric or paper.
Here's why flooring should come first: It creates a seamless appearance without visible gaps. Flooring beneath the toilet reduces the risk of leaks and prevents water damage to the subflooring. This method makes future toilet replacements easier.
A subfloor is the layer at the very bottom of your shower pan. Most homes will consist of a standard subfloor constructed of running boards laid over floor joists, a plywood layer over the running boards, or if on a first floor, the subfloor can be a concrete slab.
For the shower enclosure or wetroom to remain waterproof, the base must be sealed to be completely leak-proof. Such a waterproof tray prevents any seepage of water below or around the tray, and is crucial for maintaining the bathroom's structural integrity, thereby preventing any costly repairs.
The flexible silicone sealant is a necessity in a bathroom. If you used standard grout between the course of tiles and the bathtub or tray, pressure when stepping on these will cause a hairline break in the grout where water can then ingress and blow out your tiles. And no one wants that!
Install the Underlayment
Underlayment helps preserve and insulate the floors, dampen noise and protect against moisture. If your laminate planks are made with an attached underlayment, skip this step.
Once you have prepped your walls, you are ready to install the flooring in your home. You should do this before painting any of the walls. That way if you do cause any damage while installing the floors you don't have to repaint areas.
Your Flooring Material Is Delicate.
Installing cabinets first protects your bathroom's flooring material from chipping, scratching, soiling, and other damage associated with moving heavy cabinets and equipment on the delicate flooring materials.
Using a mixture of building sand and cement (5 parts sand, 1 part cement), mix up some mortar and apply a relatively thin layer to the area beneath the tray. Gently press the tray onto the mortar before using a spirit level to check everything is as it should be.
If you have a healthy budget and want to maximise the feeling of space in your bathroom, a wet room can be an excellent choice for your home. However, if you have a limited budget and like the feeling of an accessible shower that still has a semi-enclosed feeling, then a walk-in shower tray might be more suitable.
Install the Shower Pan
Now you're ready to secure the shower pan in place. Some shower pans use clips or screws to fasten the pan to wall studs. For our project, the shower pan secures to the subfloor with mortar. Mix enough mortar to apply to the installation area.