The accumulated water must be emptied after each drying cycle. However you can also set up your dryer to drain automatically using the drain hose provided.
Emptying the Water Tank
The built-in water tank will be used by default to drain condensed water, and it is recommended for you to empty it after each use to prevent leaks. (Start/Pause).
Your Heat Pump Tumble dryer comes with a built-in water tank to drain water. However, if you do not want to use the water tank, you can install a drain hose instead. A long drain hose is provided and can be used as an extension to the main drain hose.
And because heat pumps don't require water taps or drainage pipes like most vented models do, there's no need for expensive installation costs or maintenance fees - something else that makes heat pump tumble dryers cheaper to run in the long run.
Vented dryers expel hot, moist air outside through an external vent. Heat pump tumble dryers, on the other hand, reuse the hot air to minimise energy consumption, making them the most energy-efficient option. Heat pump dryers also require the user to empty the water tank.
Discover 4 unique ways to reuse water from your heat pump dryer, including watering plants, filling your iron, mopping floors, and washing windows. Maximize efficiency and save water with Hotpoint. #Hotpoint #Tumbledryer #heatpump #savewater.
Do you need to empty water from a heat pump dryer? Yes. The dryer works by pumping warm air through the clothes and collecting the condensed water in a tank. You can easily empty the tank out into the bath or sink.
Conventional gas dryers vent heated air to the outdoors. Instead of venting the heated air, heat pump dryers recycle the heated air until the moisture is removed. When the air inside the drum flows over the cool part of the coil, moisture is pulled from the air and drained into a collection tank or drainpipe.
A conventional condenser dryer uses a heating element to warm the drum and dry the clothing. Drying at a lower temperature, and therefore using less energy, a heat pump tumble dryer takes slightly longer to dry the clothing but at a lower cost. This also means the drying cycle is kinder on your clothes.
Emptying the condensate container of your dryer:
In this case, you will need to empty the condensation container every time the dryer finishes drying the laundry, and also if it becomes full before drying is complete. Only the correct drainage of the condensate water ensures durability and prevents long-term damage.
Heat pump dryers, on the other hand, are condenser dryers. This means the moisture is collected in an onboard water tank instead of vented into the room. You do have to occasionally empty the tank but you can use this water on your garden, or you can plumb the dryer into a drain.
Your water tank will either be located at the top of the machine in a drawer or at the bottom of the machine, behind the kick plate. Check your user manual if you are not sure where your water tank is located.
1 Using both hands, pull the water tank (A) forward to remove. 2 Empty the water through the drain hole (B) and place the water tank back into place. Please note: If you empty the water tank and press and hold Start/Pause, the corresponding indicator turns off.
Heat pump dryer: energy-efficient from A+++
This example is based on a dryer that lasts up to 10 years on average, depending on its usage.
When your dryer vent is so full of lint and other debris that heat cannot escape outdoors efficiently, you've got a serious fire hazard on your hands. Yes, dryer fires do occur, and every year in the U.S. approximately 2,900 households suffer the consequences of one.
No. To avoid a fire hazard you should always ensure that you don't leave your dryer running when you're not at home.
Beneath your evaporator coil is your condensate pan, which catches the condensation from the coil. The water drains from the pan through a PVC pipe that terminates at an indoor drain or an outdoor location.
They're much cheaper to run
Thanks to the far lower energy demands of heat pump dryers, you save yourself a lot of money on running costs compared to a vented dryer. A lot of heat pump dryers cost around half or less to run each year than traditional style vented models.
We recommend emptying every time you use it. Do heat pump dryers take longer to dry? Yes they do but they will save you money as they use much less energy than condenser dryers.
Because they do not release moisture into the air, heat pump dryers do not require a vent or window. When you factor in the low energy usage, they're also a smart buy for diehard dryer users looking to slash their energy bills.
Air-vented dryers draw air from the room in which they are installed, heat it and lead it through the humid clothing in the drum to evaporate the moisture. The humid air is then expelled to the external environment. Air-vented dryers thus require an exhaust to the outside, making them less practical.
This is because the heat pump takes a long time to reach the maximum working temperature in the heating system. 1. Choose the right drying programme. Make sure that the respective type of washing and the care symbols on the label of the laundry comply with the drying program.
Using a lower temperature to dry clothes, a heat pump tumble dryer offers better protection for your clothes. Although it takes slightly longer to dry a load, compared to a standard condenser dryer, it can help to significantly reduce your energy consumption.
While conventional tumble dryers release hot air used to dry clothes, heat pump technology conserves and reuses it. It will take longer to dry clothing as the maximum temperature reached is 50°C. In comparison, the maximum temperature reached in a condenser dryer is 70-75 °C.