When it comes to cooling your home, return vents are best installed near the ceiling so they can draw in any hot air that has risen. Supply vents should also be placed high on the wall for better distribution of cold air throughout the room.
Up High: having an air return higher up on a wall will be better at sucking in hot air that rises. Making it more efficient at transferring this hot air back into your system to repeat the cooling cycle. Down Low: if you have your air return lower on your wall it will function better as a cold air return.
Conversely, in the Winter heating season, you will want to pull the coldest air back to the furnace to be warmed and create circulation. In these months, you'll want the lower air return open and the upper air return closed.
Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even heating and cooling throughout your home. In the summer, open your high returns and close the low ones.
1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space. 2. Return air shall not be taken from a hazardous or insanitary location or a refrigeration room as defined in this code.
Return vents are usually larger than supply vents and are in large rooms in the home. The return vents in your home help equalize the pressure that changes as your HVAC system heats or cools your home. These vents should never be fully closed because closing them off restricts airflow and strains the system.
Instead, there should be at least one return vent in every room, with two or three being ideal. If your house has only one return vent, this is not a problem — make sure to keep the doors open in every room so the air can circulate properly. Make sure there are no furniture, draperies, rugs, etc. blocking return vents.
Can You Have Too Much Return Air? Too much return air coming through your system isn't much of an issue because the fans and ductwork working to get that air back into the system only pull with so much force to make the HVAC system work correctly.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
High returns upstairs (suck the stratified heat off the ceiling) & low return down stairs (suck the cool puddled air off the floor). If supplies are located and designed correctly, they will mix the air so that stratification is not an issue, so return location is mostly irrelevant.
From an aesthetic standpoint, facing the grates upward will make the fixture appear sleek and clean (since you won't be able to see into the wall). You could also paint the inside of the vent a dark color to make it even harder to see inside (and see the inevitable accumulation of dust and drywall).
What room should return air ducts not be installed? Return air ducts should generally not be installed in rooms with high humidity or areas prone to moisture accumulation, such as bathrooms or kitchens.
While return vents don't always require filters, adding them provides additional filtration, improving indoor air quality and keeping dirt and debris out of your system.
Return registers can be large and centrally located in your home, or they can be in every room. HVAC professionals recommend that each room have a cold air return vent to help with flow and temperature control. These vents are typically found on an interior wall.
However, it's best to have a 16 to 22°F difference between your supply air and return air temperature when you set your thermostat. HVAC professionals call this the “evaporator Delta T.” When a temperature difference is within the Delta T, your AC is working properly.
You can usually spot return vents on your walls, ceiling, or floors. Look for a white grille without shutters to spot an air return vent. These vents will typically integrate seamlessly into your home.
By installing more return vents throughout your home, they can trap the air and remove it, improving air circulation. A drawback with this method is that your ductwork needs enough space to support additional vents. Smaller homes that can't add more vents need to pursue other options.
Parts of Your Home Are Hotter or Colder
If there's not enough return air, your living room can be 10℉+ warmer or cooler than, for example, the bedrooms.
Common Issues with Return Ducts: Clogs and Leaks
You can generally identify a blocked air duct by a distinct drop in heating and cooling efficiency, increased energy costs, and occasionally a musty, dusty smell throughout the home.
Having a number of return vents (preferably one in every room, but also 2 or three is far better than just one) creates regular air pressure. If you have one return vent, your house is great. Maintain the doors to every room open so air can properly flow.
Due in large part to the short cycling issues mentioned above, components on an oversized heating and/or air conditioning systems are more likely to fail sooner than those on a properly sized system. As a result, you may end up having to replace your HVAC system sooner than expected.
Avoid blocking air vents with pillows, furniture, plants, or pictures. When the air vents are blocked it means that heated or cooled air needs to squeeze by what is blocking it to reach the rest of the room.
Closing the vents doesn't do it any favors. In fact, instead of helping the air conditioner cool less, closed registers force the same amount of air through other ducts. This builds pressure in the system and makes your HVAC system work harder to distribute the air where you need it.
Dropping a mattress directly onto a floor vent will completely restrict the airflow and prevent the HVAC system from heating or cooling the space. This, in turn, can cause the HVAC system to work overtime, leading to premature wear and tear.
CO2 levels that are higher than 1150 ppm will typically occur in bedrooms that are not fitted with a ventilation system and where windows and doors are closed. Above 2600 ppm: Insufficient ventilation—both sleep quality and next-day performance are adversely affected.