Do I need to rinse after mopping with Pine-Sol?

Author: Prof. Evangeline Olson II  |  Last update: Monday, September 8, 2025

If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and “dry” the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.

Do you need to rinse the floor after Pine-Sol?

If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and ``dry'' the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.

Are you supposed to rinse after mopping?

Don't neglect to rinse after mopping. Rinsing is an important, often overlooked final step. All cleaning products, no matter what they are, leave behind residue. Dirt, dust, grime, ect, is 'attractanted' to the residue, and 'binds' with it.

Is Pine-Sol safe after it dries?

Is Pine-Sol Safe After It Dries? Yes, Pine-Sol is less harmful after it dries, but it's still a good idea to be cautious. Some residue can remain, especially on surfaces that your dog might lick or come into contact with.

Is Pine-Sol good to mop floors with?

Pine Sol is a bit acidic, it'll clean floors but is harsh on the finish. Concentrated Pine Sol can strip paint and other finishes. A pH neutral product like Bona suggested by others is really much better to use if one wants their floors to last.

SHOOTOUT Ultrasonic Cleaner Filled With Pine-Sol Vs. a Pine-Sol Soak to Clean Carburetor Parts

Why is my floor sticky after I mop with Pine-Sol?

That's because the chemicals in your floor cleaner leave behind a residue. Not only does this residue make your floors sticky, it can also lead to a cloudy appearance and discoloration on wood floors. Fortunately, you can follow these steps to remove floor cleaner residue.

Does Pine-Sol leave a residue?

After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.

Do you have to wipe off Pine-Sol?

Once the surface is wet with the Pine-Sol, let stand for 10 minutes, and then rinse or wipe off with water.

What precautions should be taken when using Pine-Sol?

CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.

Does Pine-Sol keep snakes and mice away?

Pine Sol can be a useful deterrent, but it is generally less consistent than other pest control methods like traps, baits, and sealing entry points. While Pine Sol's strong scent can temporarily repel mice, it may not provide a long-term solution.

Can you leave the floor wet after mopping?

Use a squeegee or wet/dry vacuum: After mopping, use a squeegee or wet/dry vacuum to remove as much water as possible from the floor. This can help to speed up the drying process and prevent water from seeping into the grout or cracks in the floor.

How to properly use Pine-Sol?

  1. Mix ⅛ cup per gallon of water.
  2. Mop, wipe, or spray with solution.
  3. Tip. For tough jobs, use full strength and rinse immediately.

Is it better to mop floors with hot or cold water?

Hot water is great for removing grease, stubborn dirt and caked-on residue. It is more effective in killing bacteria and germs. Hot water is a good choice for tile floors and vinyl. Be sure to check the manufacturer's instructions to make sure your floor is resistant to hot water.

Do you need to rinse your floor after mopping?

To ensure no residue is left, rinse one final time with clean water (don't add floor cleaners or soap).

Can I use Pine-Sol on vinyl floors?

Pine-Sol is also safe for luxury vinyl wood plank flooring and vinyl tile flooring, so long as used with a dry mop and you do not saturate the floors.

Why are my floors so sticky after mopping?

Sticky floors after mopping are usually caused by soap residue left behind. To prevent this, use a floor cleaner designed for your floor type and rinse with clean water afterward.

Do you need to rinse after mopping with Pine-Sol?

If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.

What can you not clean with Pine-Sol?

Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.

How long does Pine-Sol smell last?

So fresh! Love love love the original Pine Sol, but this one is my favorite or the scented line! It has a very fresh and clean scent and doesn't leave my floors sticky after mopping them. The scent lasts for hours after using it and will fill your house after using it.

Is it safe to flush Pine-Sol down the toilet?

Step 4 Splash Pine-Sol® into the toilet bowl and hit every crevice with your trusty toilet brush. Let it sit for a few minutes and flush. TIP: Only have a few minutes to clean? Add a little of your favorite scented Pine-Sol® to the toilet bowl in the morning to keep your bathroom smelling fresh throughout the day.

Is Pine-Sol safe on skin?

Harmful if absorbed through the skin. Causes skin irritation. Do not get on skin or on clothing. Causes moderate eye irritation.

Does Pine-Sol keep bugs away?

Create a fly and wasp repellent.

Upstairs Downstairs Cleaning says that you can use full-strength Pine-Sol as an insecticide or a 4:1 Pine-Sol to water solution spray for staving off wasps and other stinging insects—just steer clear of honeybees!

Why is there a film on my floor after mopping?

If too much cleaner is used, or if it's not suitable for your floor type, it leaves a sticky film that attracts more dirt. Another common reason is the mop itself. Using dirty water or not changing it frequently enough while mopping can spread grime rather than remove it, which leads to that unwanted sticky floor.

Can Pine-Sol be dumped down the drain?

Some items that can be poured down the drain inside your home, if you are on the County Water and Sewer systems (Do not pour down storm drains or in septic systems): Ammonia based cleaners (Windex, Glass Plus, etc) Drain cleaners (Drano, Liquid Plumber, etc) Most bathroom cleaners (Pine-Sol, etc)

Do you need to rinse fabuloso?

No rinsing required. To clean and disinfect hard, non-food, non-porous surfaces: Dilute 1 part Fabuloso Antibacterial with equal parts tap water and apply to surfaces by sprayer. Spray 6-8 inches from the surface with 4 pumps or until visibly wet. Leave on surfaces for at least 10 minutes.

Previous article
What can I use instead of baseboards?
Next article
What steel do Japanese use for making knives?