Electric tankless water heaters are incredibly energy-efficient to operate, saving about 20% to 30% on utility bills compared to traditional tanks by eliminating standby heat loss. However, they draw a massive amount of electricity all at once (often 15,000 to 36,000 watts), which can trigger higher peak demand charges or require expensive electrical panel upgrades.
The answer is no — tankless water heaters can save money on your monthly electric bill because they're 8%-34% more efficient than storage water heaters.
Cons: Minimal energy savings compared to well-insulated tank heaters, high energy demand (12 kW to 30 kW), potential need for electrical system upgrades, and higher operating costs for electric models.
Plumbers often hesitate to recommend tankless water heaters because they act like high-performance sports cars. Unlike traditional tank models that are "workhorses" and can function while mostly ignored, tankless units require precise installation, regular maintenance, and are highly sensitive to mineral buildup.
For a 3-bathroom home, you generally need a tankless water heater with a flow rate of 7 to 9 GPM (Gallons Per Minute). This size can effectively run 2 to 3 major hot water fixtures (such as a shower and a washing machine) simultaneously.
For larger households, multiple showers, laundry, and dishwashing may run at the same time. Hot water demand could reach 10–12+ GPM. A high-capacity tankless water heater—or even two units installed in parallel—may be the best solution.
A 10-minute shower typically uses 12 to 25 gallons of hot water, depending on your showerhead's flow rate and how hot you keep the water.
A tankless water heater usually goes cold mid-shower because the water flow drops below the heater's minimum activation threshold, or the system is overloaded by using too many fixtures at once. It can also happen if sediment blocks the filter or the unit is improperly sized.
A typical tankless water heater's lifespan often ranges from 15 to 20 years or more with proper care. In many cases, well-maintained systems can reach 25 to 30 years of service. That extended lifespan is one of the strongest considerations for homeowners researching how to choose a tankless water heater.
Broadly, heat pumps are the most efficient form of heating. They can be more expensive than a furnace, especially if you purchase a geothermal heat pump. However, geothermal heat pumps are one of the cleanest heating options on the market. A geothermal heat pump can produce 1/6th the CO2 of a natural gas furnace.
Tankless water heaters come with a limited flow rate, meaning they might struggle to provide hot water simultaneously to multiple appliances or fixtures. If your household comprises several individuals taking showers or running appliances concurrently, you may need to invest in a larger unit.
Water heaters can create high energy bills if they operate inefficiently, consuming more energy to produce the same amount of hot water as a newer, well-maintained unit. Over time, sediment can build up in the tank, reducing its capacity and forcing the heater to work harder and longer to heat the water.
Yes, tankless water heaters can fill a tub, but the rate they do it depends on the unit's flow rate and capacity. If you have a high-capacity water heater, you should be able to fill a standard bathtub without issues. However, more giant tubs may require a higher flow rate or a more powerful unit.
In most homes, Heating and Cooling (HVAC) systems drive the highest energy costs, accounting for nearly 40% to 50% of your total electricity bill. Following these, the appliances that run up your bill the most include water heaters, refrigerators, and laundry machines.
This problem usually comes down to capacity, heat production, or mixing issues inside your plumbing system. Sometimes the fix is simple, like adjusting your water heater temperature or flushing out sediment. Other times you may need a new mixing valve, an element replacement, or a different size water heater.
Heating and cooling systems (HVAC)—such as central air conditioning and electric furnaces—use the most electricity in a home, accounting for about 40% to 50% of your total energy consumption.
Here are six of the most common problems and maintenance concerns for tankless water heaters:
A tankless water heater doesn't actually "stay hot" in the traditional sense; instead, it provides an on-demand, continuous flow of hot water. The unit only generates heat when a hot water faucet is actively turned on, and it will continue heating for as long as the water runs.
A whole-home tankless water heater costs an average of $2,400, but costs can range anywhere from $1,600 to $3,800.
Impact of Cold Weather on Tankless Water Heaters
Poorly insulated pipes and units are particularly at risk of freezing, which can damage the entire system, including critical components like the heat exchanger.
If possible, install your outdoor tankless water heater where it will be sheltered from wind, or build an enclosure that blocks the wind. Install a pipe cover to conceal and protect the gas, water and power connections. Insulate pipes to keep freezing temps from reaching water lines.
4 Ways to Reduce Cold Water Sandwich
The 4-minute shower rule is a sustainability and cost-saving initiative advising people to limit their daily showers to four minutes or less. This practice helps conserve water, reduce energy used for heating, and lower household utility bills by limiting consumption to approximately 36–40 liters (roughly 9.6–10.5 gallons) per shower.
Toilet and faucet leaks
The most common cause for a high water bill is running water from your toilet. A continuously running toilet can waste up to 200 gallons a day or more depending on the volume flow down the drain.
A standard toilet flush uses between 1.28 and 1.6 gallons of water. However, the exact amount depends heavily on the age and model of the toilet you are using: