Unlike natural granite, a composite granite surface won't require sealing.
Heat-Resistance—while composite sinks are heat-resistant, they aren't heat-proof. It's important to note the acrylic resin binders found in composite sinks can warp or melt when exposed to extreme heat. An example of this is when a hot pot or pan is placed directly in the sink.
Yes, composite sinks can withstand boiling water. There is no issue with pouring hot water down a granite, quartz, or solid surface sink.
If you are concerned about water marks being left on the surface, which are more likely to appear on composite sinks of a darker colour, then wiping your sink with a lint-free cloth to dry it off should do the trick. Drying your sink after each rinse will help prevent the build-up of water stains and limescale.
Durability. Composite granite sinks are primarily made up of a mixture of quartz granite particles and resin, both of which are incredibly hard-wearing and durable. The result of this is that any knocks that would usually dent, chip or scratch a regular sink will not show up on a composite sink.
Unlike natural granite, a composite granite surface won't require sealing. However, these sinks do require a certain amount of upkeep to keep the protective coating intact. To do so, apply a cleaner and sealer to the sink with a soft cloth.
If you do notice that there are darker stains, or if you have a light-coloured sink that is showing more surface staining, you can clean these with a mixture of 50% bleach and 50% water. Dip a nylon bristled brush into the bleach solution, and use it to scrub the stains. Rinse well with water when you're done.
A 50% mix of water and white vinegar can be used to remove limescale deposits, ensure to rinse thoroughly after use, do not leave the vinegar in contact with the surface. A nylon scratch pad or toothbrush can be used on difficult areas. Dry the sink after use to delay future build up.
Removing Stains and minor scuff marks
Rinse well. Also, the use of Bar Keepers Friend (directions included on bottle) will help remove stubborn stains. Finally, clean with BLANCOCLEAN to put a protective coating back on the sink's surface.
Instead, it recommends bleach, Soft Scrub and a Scotch-Brite pad and warns not to leave the cleaners on the surface for more than 15 minutes. "There are certain acidic compounds such as coffee and spaghetti sauce, etc.
This type of sink is easy to clean
Using a non-abrasive cleaner will keep it clean. Taking care of it properly will preserve its color for many years. Keeping it clean is also important. You can use a magic eraser sponge to remove stains and a 50/50 water-bleach solution for cleaning.
Step 1: Run some warm water through your composite sink. Step 2: Wipe your sink with soapy water. Step 3: Apply baking soda paste to the stains. Step 4: Use a vinegar/water solution to deal with limescale or water stains.
Clean the heck out of the sink, then clean it again with rubbing alcohol. Soak/dip the cups in hot water to make them more pliable, then apply a little petrol jelly around the cup.
'The easiest kitchen sink material to maintain is going to be one made of stainless steel, copper, cast iron or enamel because they will not support microbial growth as they are not cellulose material,' says Darren Hudema, director of training and technical services at PuroClean.
Composites are non-porous – This makes them much more sanitary than granite, which can conceal bits of food and bacteria in its crevices. Composites also can withstand disinfectant products without damaging the material, unlike granite.
Resin sinks are lightweight, and look similar to granite or quartz sinks, but with a thinner profile and smaller price tag. Also known as epoxy or composite sinks.
Applying a light layer of food grade mineral oil will add a protective repellent layer to your sink - simply leave the oil on the surface for 45 minutes then buff with a cloth. Repeat the process if needed. With a granite composite sink, prevention of stain and limescale build up is key.
SURFACE LUSTER
Clean, rinse and dry sink completely. To restore luster and extend the time between cleanings apply a thin, even coating of Quartz Sink Conditioner, food-safe mineral oil, or olive oil to the entire sink surface with a cloth. Remove excess with a cloth or leave overnight. Reapply as needed.
Hard Water Mineral Deposits (Calcium, Magnesium, Lime)
Unless you wipe your sink dry after every use, water left behind will eventually evaporate. When water evaporates, minerals such as calcium, magnesium, and lime are left behind, bonding to the surface. These spots are called mineral deposits.
After 30 minutes use a brush to scrub, and then rinse off with water. Once done, apply mineral oil (or baby oil or olive oil) to the entire sink surface. Using mineral oil regularly on the sink surface will prevent hard water and mineral deposits from building up on the sink surface.
A composite sink is made from a luxurious mixture of materials such as granite, quartz, resin and high grade acrylics. This combination of tough ingredients creates a surface finish that is easy to clean and resistant to lots of damage, including scratches and stains.
If you notice stains on your white composite sink, simply make up a mixture of dish soap and water, and wipe the sink down with a lint-free cloth or non-abrasive sponge. For the really difficult stains that just won't budge, try a mixture of vinegar and water and scrub the area with a soft bristle brush.
We recommend shopping for kitchen sinks made from durable materials, such as stainless steel, stone composite, enameled cast iron, fireclay, and copper. Stainless steel is a common material for kitchen sinks, but not all stainless steel sinks are created equal.
Once your granite composite sink is cleaned, you can restore its shine using mineral oil. Apply a tablespoon of mineral oil to a soft cloth and buff using a circular motion. Wait 1 minute, wipe away and enjoy the luster.