Using a bleach tablet can impair your toilet and pipe system. Unfortunately, many homeowners do not notice a problem until it is too late. Some signs that indicate toilet damage from bleach tablets can include the following: Slow leaks from toilet base.
Toilet cleaning tablets are marketed as one of the most effective and simple ways to maintain clean toilets. However, because they are synthetically made of chemicals and bleach, they can be very damaging to the toilet bowl.
Bicarbonate of soda and white vinegar works pretty well as does Cola. You can also buy bleach tablets to dissolve in the bowl or use baby bottle sterilising tablets.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
While they may seem like the perfect way to clean and sanitize your toilet, the reality is that they're quite harmful to it. Those blue toilet tablets can cause corrosion to parts inside the tank and contain harmful chemicals that may be released into your home and the environment.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
“Each chlorine tablets contains cyanuric acid. This means that using tablets continually will increase the cyanuric acid in the pool water to unsafe levels. This will reduce the effectiveness and killing power of your chlorine and can make the water unsafe over time.”
Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so. This may be especially important if you have hard water or if you have a toilet that doesn't get used very much.
H302 Harmful if swallowed. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H410 Very toxic to aquatic life with long lasting effects.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
2000 Flushes Automatic Toilet Bowl Cleaner is safe for plumbing and septic systems when used as directed. 2000 Flushes tablets should only be used in a toilet that is flushed regularly (at least once a week).
These tablets can wreck havoc when it comes to your toilet's flush valve and tank guts, and many of our commercial toilet repair services are oriented around fixing the issues posed by these tablets. Blue water toilet tablets are also seriously detrimental to the environment.
Bleach and chlorine can cause the rubber to become brittle and corrode the metal parts. This causes the toilets to either not flush correctly or begin to leak.
One of the most effective ways to keep your toilet bowl clean is by using a quality toilet cleaner. Fluidmaster's Flush 'n Sparkle™ cleaning system is a great option, as it provides a powerful cleaning solution with every flush.
Quality checks indicated that toilet parts should not have worn out, so they conducted further studies and discovered that the chemicals in the drop-in cleaner tablets will eventually damage the flush valve, flapper and other parts in the tank.
It's essential to clean the inside of a toilet tank to remove mineral deposits that can damage or interfere with the toilet's operation. Baking soda will absorb odors, break down stains, and dislodge fungal growth with its abrasive power.
Sanitizing Procedure. In a clean quart container about half full of water, put 1 to 1 1/2 fluid ounces (2-3 tablespoons) of a standard unscented, non-detergent household chlorine bleach (5.25% concentration) for every 500 gallons of water to be treated. Pour the bleach solution directly into the storage tank.
For the pool owner who wants that instant gratification, liquid chlorine may be the best way to get you back into your pool. But for the pool owner who regularly uses the pool and wants the convenience of not having to perform as much maintenance, tablets may be preferable.
Scrub the entire surface with your toilet brush, paying special attention to any stains or buildup. Make sure to clean underneath the rim, which is a hot spot for bacteria and mineral deposits. Flush the toilet to rinse away the cleaner and any loosened dirt, grime, and mineral deposits.
Vera Peterson, president of Molly Maid, recommends starting with vinegar to soak the tank. “First, remove the lid and take a peek inside,” she told Martha Stewart Living. “If you see any mineral buildup or crud, pour four cups of vinegar into the tank. Allow this to soak for up to an hour.”
Essential Supplies for Bathroom Cleaning
All-purpose cleaner: For countertops, sinks, and surfaces. Glass cleaner: Ensures mirrors and glass are streak-free. Disinfectant spray or wipes: Perfect for sanitizing high-touch areas. Toilet and shower cleaners: Removes stains, bacteria, and soap scum.