Can you use the Bissell steam shot on baseboards?

Author: Efrain Kessler I  |  Last update: Wednesday, September 10, 2025

literally. you can. you can steam it and then wipe it down. and boom, it's clean.

Can you use a steam shot on baseboards?

If your baseboards are extra dirty with sticky, stubborn grime, use a steam cleaner. It doesn't matter what type of steam cleaner you use, as long as it has a handheld nozzle attachment that can direct a steady spray of steam onto your baseboards.

What not to use Bissell steam shot on?

What not to use a Bissell Steam Shot on Keep the Steam Shot away from electronics, unsealed floors, water-based paint, porous surfaces and plastic.

What surfaces can you not use a steam cleaner on?

Steam should not be used to clean the following:
  • Unsealed, polished, or waxed wood flooring, cabinets, or furniture.
  • Laminate flooring.
  • Painted surfaces, including walls.
  • Furniture and fabrications made of paper, wood, plywood, or composite cardboard.
  • Fine woodwork, including musical instruments, and antiques.

What is the best thing to clean baseboards with?

Mix together a solution of warm water and a gentle dish soap that's safe for your baseboards--Becky Rapinchuk of the Clean Mama blog recommends 4 to 5 cups of water to a few teaspoons of soap. Soak a microfiber cloth in the solution, wring it out (you don't want it too damp), then wipe down the baseboards.

#1 SPRING CLEANING TRICK you SHOULD be using to save time and money! 💙 Steamshot Clean 101

How do you make baseboards look new?

Fix scratches with a fill stick, restore moulding with hot glue, and cover damage with wood filler. Sand and paint for a beautiful finish.

Where does the dirt go when you steam clean?

So, where does the dirt go when you steam clean? Actually, it doesn't go anywhere. Instead, the heat and vapour of steam cleaning ensure that all the unwanted substances or stains are fully broken down and easy to get rid of.

What are the disadvantages of steam cleaners?

Cork Tiles and Unsealed or Waxed Timber: Steam mops can damage these surfaces. Timber and Laminate Flooring: Manufacturers often warn that steam can seep between boards, potentially causing expansion and damage over time, including delamination and buckling.

When should you not use steam?

What You Shouldn't Steam Clean
  1. Walls or furniture finished in a water-based paint.
  2. Unsealed surfaces such as hardwood floors, marble, limestone, concrete, tile, or natural stone.
  3. Porous surfaces like cord, bamboo, paper, and cardboard.

What happened to Bissell's steam shot?

Why is BISSELL recalling Steam Shot™ Handheld Steam Cleaner? Out of an abundance of caution, BISSELL is voluntarily recalling its Steam Shot™ Handheld Steam Cleaner because, in rare cases, this product can expel hot water or steam onto users while heating or during use, posing a burn hazard.

Can you put cleaning solution in a Bissell steam shot?

It's also recommended that you never put descaling, alcoholic, or detergent products into the steam cleaner, as this may damage it or make your Steam Shot™ unsafe for use.

Are steam cleaners really worth it?

Steam Cleaners Save Time, Money, and Space. In the long-run, steam cleaners are not only beneficial to your health, but also to your budget, storage space, and peace of mind.

How do you keep dust from settling on baseboards?

Once you have cleaned the baseboards, wipe the baseboards again with a used fabric softener sheet. The fabric softener sheet will create a mild static charge that will actually help to prevent dust from settling on the clean baseboard again.

Can I steam clean baseboard heaters?

4) Remove large pieces of debris and vacuum the remaining dirt with brush-like attachments. 5) The fins can be (gently) cleaned with pressure steam cleaner. Please ensure you place towels under the area for floor protection.

What floors should not be steam cleaned?

Hardwood floors that are not sealed or improperly sealed are highly susceptible to moisture damage. Steam is likely to seep into the interior of the wood, causing the floor to swell, warp, and even cause long-term damage. For this type of floor, we recommend using dry or wet mop cleaning method.

What can you clean with a Bissell steam shot?

Your BISSELL steam cleaner can tackle all manner of hard and soft surfaces around your home, using it on floors or as an upholstery steam cleaner, as well as on carpets, mattresses, pet beds and children's toys.

Is steam cleaning better than mopping?

The steam's heat penetrates even the toughest grime, rejuvenating floors by lifting and removing dirt that traditional mops may leave behind. This makes the steam mop a superior choice for thorough cleaning, especially on surfaces that are often challenging to maintain, like textured tiles or deep grout lines.

Should you steam clean before or after mopping?

You should use a steam mop after you've swept or vacuumed the floor, but it typically replaces the need for a traditional wet mop. Steam mops use heat and steam to sanitize and clean the floors, which eliminates the need for a separate wet mopping session.

What is the best home steam cleaner?

It's equally important to judge how easy they are to use, their versatility, weight, safety features and more.
  • Best Overall: Euroflex Vapour Pro M4S.
  • Best Value: Reliable Pronto Plus 300CS 2-In-1 Steam Cleaner.
  • Best Canister: Dupray Neat Steam Portable Steamer.
  • Longest Steam Time: Steamfast Deluxe Canister Steam Cleaner.

How do I make my baseboards look clean?

If your baseboards have stubborn dirt or stains, clean them with a vinegar solution and scrub any problem areas with baking soda, says Sokolowski. Mix equal parts white vinegar and water in a spray bottle or bucket.

What is the most popular baseboard trim?

Rounded or Stepped Baseboard

This is the most popular baseboard profile used in homes. The top of the trim has a rounded shape that tapers into the wall. The trim of these types of baseboards looks best in modern homes because of its relatively short profile and simple design.

How do you freshen old baseboards?

There are a few ways to do this from giving the trim a thorough cleaning to taking it down and completely refinishing it.
  1. Clean the Trim. A thorough cleaning can breathe fresh life back into your trim. ...
  2. Sand and Scrape Damaged Areas. ...
  3. Sand and Fill Small Holes. ...
  4. Apply New Stain. ...
  5. Add the Finish.

Previous article
At what temperature do drain pipes freeze?
Next article
Is it safe to stay in a house with water damage?