The Pink Stuff is gritty and alkaline, which means it should be good at cutting through greasy messes and lifting oily dirt off surfaces by creating friction. But while the manufacturer's website says it can be used on almost any surface, Rogers says he'd limit it to hard surfaces like tiles, tubs, and sinks.
What Not to Clean with The Pink Stuff Cleaner Since it's an abrasive product, you have to be careful not to scrub too hard, or you'll damage your surface. I wouldn't use The Pink Stuff cleaner on anything plastic, highly polished, or painted, such as walls, doors, or furniture.
You should also avoid aggressive decalcifiers, chloroform, ketones, acetone, methylene chloride and strong acids. An abrasive can be used, because Solid Surface is scratch-resistant, unlike acrylic. After using a Solid Surface bathtub, rinse with warm and then cold water and dry the bath well with a soft cloth.
To effectively eliminate pink mold, you can create a mixture of bleach and water in a 1 to 1 ratio. This solution works well for cleaning and disinfecting surfaces affected by mold, including pink mold commonly found in showers and on tiles.
The Pink Stuff Cream Cleaner is great for general build up of grime and soap deposits around the bath and sink areas.
✨ Our 𝗖𝗹𝗲𝗮𝗻𝗶𝗻𝗴 𝗣𝗮𝘀𝘁𝗲 can be used on sinks, showers, tubs, and tiles - leaving your bathroom spotless!
Cleaning a moldy shower with the pink stuff and Clorox toilet bowl cleaner 🧼🫧 The pink stuff does work to clean and lift some mold, but as you can see it also leaves behind a messy, gritty texture to clean off as well!!
Pink mould is not as dangerous as some other types of mould, but it can still cause health problems especially if it is inhaled or ingested regularly. It can also lead to urinary tract infections, digestive problems and in some rare cases we're seeing cases of pneumonia.
If you want a germ-killing cleaning solution with the convenience of a ready-to-use spray, try Clorox® Clean-Up® Cleaner + Bleach. Just remove excess dirt, and spray Clean-Up® Cleaner 4–6 inches from the surface until thoroughly wet. Let stand for 30 seconds, then rinse or wipe clean.
Its formula is designed to tackle tough stains without causing harm to a variety of surfaces. This means that whether your bathtub is made of porcelain, acrylic, or fiberglass, you can trust dish soap to cleanse without compromising its beauty.
For stubborn stains, you can use a magic eraser sponge, these are safe to use and will not damage the surface of your tub.
To clean your bathtub, simply sprinkle baking soda on every surface that is dirty then add warm water. The mixture should begin to bubble and after about two to three minutes, begin scrubbing. If you have tough stains, combine your baking soda with either vinegar or ammonia.
1. Tiles and grout. One of our favourite ways to use The Pink Stuff is to revive tired and grubby tiles. Work it into the grout with a sponge or an old toothbrush and you'll be amazed at how much you can brighten up those old bathroom or kitchen tiles.
The cleaning paste is ideal for almost every surface. It cleans dirt, stains and grime from stovetops, sinks, ceramic tiles, showers, paintwork, brass, rust, outdoor or patio furniture, PVC, ovens, cookware and more.
The Pink Stuff just barely outperformed its competition, effectively removing 97% of the grime on almost every surface. The Soft Scrub removed around 93% of the greasy mess from ceramic and stainless steel, and it worked a bit better than The Pink Stuff on plastic.
The pink residue is the result of naturally occurring airborne bacteria. The bacteria produces a pinkish film, and sometimes a dark gray film, on surfaces that are regularly moist, including toilet bowls, showerheads, sink drains, and tiles.
As long as it doesn't enter the body, contact with Serratia marcescens during washing or cleaning is generally safe for healthy people (be careful not to touch the eyes or open cuts with contaminated hands).
While pink mold is less harmful than black mold, it can still cause health issues. Exposure to pink mold can lead to urinary tract infections, respiratory problems, and even pneumonia, particularly in individuals with weakened immune systems.
To completely eradicate this issue and prevent it from coming back, we recommend the Clorox Tilex and Mold and Mildew Remover as our overall best pick.
The most common causes of bathroom mould are lingering moisture caused by lack of ventilation, leaky toilets, sinks, and plumbing pipes, as well as damp cellulose materials. The high moisture content and heat in the bathroom environment can increase humidity.
White vinegar and water solution
For a natural cleaning option, mix equal parts white vinegar and water in a spray bottle. This solution can help remove soap scum and water spots without damaging the bathtub's finish.
Mix equal parts vinegar and water in a reusable spray bottle. For more stubborn pink mold growth, consider using undiluted vinegar instead. Spray the affected area well and let it sit for 10 to 15 minutes. Then, scrub the mold off using an old toothbrush.
Simply tear open the sachet. Pour contents DIRECTLY into the toilet water. Let the pink foam develop and rise in the bowl. Brush to distribute the foam, if required.