Dilute ⅛ cup of Pine-Sol® in one gallon of water. Step 2 Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth.
It's great for cleaning your kitchen. Especially grease and grease build up around your range. It's good for kitchen walls and cabinetry. Hardware, or anything grimey. It's good for removing tar, nicotine and smoker's smell. It's good for any grease, or oil based stains, or things that could become stains.
Yes, you can use Pine-Sol to wash dishes, but it's important to dilute it properly. Pine-Sol is a multi-surface cleaner that can effectively cut through grease and grime. Here's how to use it safely for dishwashing:
Mix 1 cup vinegar with 3 cups of water, 1 cup of baking soda and ½ cup of dish soap in a bowl. This solution is best used right from the bowl, so dip a clean cloth into the bowl to apply the degreaser, then use the cloth to scrub the greasy surface. Be sure to rinse afterward and wipe the surface again to finish.
As per the frequently asked questions page on the PineSol.com website; We do not recommend using Pine-Sol® on dishes. It is not approved by the EPA to be used on food-contact surfaces.
We do not recommend using Pine-Sol® on dishes. It is not approved by the EPA to be used on food-contact surfaces. Is Pine-Sol® safe to use on painted surfaces? We recommend testing a small inconspicuous area before using a Pine-Sol® cleaner on any painted surface.
Dish Soap. Grease-cutting dish soaps, like Dawn, are the gentlest choice for degreasing kitchen cabinets. If extra cleaning power is needed, use a non-scratch abrasive sponge to help safely scour away sticky grease film.
Vinegar is an effective sanitizer; liquid soap is a great stain remover and degreaser; baking soda makes a gentle abrasive and lightener for tough stains; and essential oils add a clean scent — mix them together and they make the perfect degreaser for your kitchen (and other places, too!).
Use distilled vinegar.
Distilled vinegar (also called white vinegar) can be used alone as a degreaser. The vinegar can be applied to greasy surfaces with either a spray bottle or a cloth, and should cut most grease with minimal rubbing. Mix 1 part vinegar to 4 parts water.
A: We do not recommend mixing any Pine-Sol® product with other cleaning products or chemicals.
Once the surface is wet with the Pine-Sol, let stand for 10 minutes, and then rinse or wipe off with water. If your surface is heavily soiled or dirty, remove excess dirt first before applying the product. When I say my surfaces are CLEAN clean, I mean it.
Whether you're maintaining grease-free cabinets or trying to bring cabinets back to their original state after some time of neglect, by far one of the best products is the Krud Kutter. Depending on the issue, this product can cut grease, grime, oil, wax, and even tar.
Want to learn how to clean stainless steel appliances without streaks? We'll show you how Pine-Sol® can help you clean grease and stains off your appliances to keep them looking fresh and fabulous.
No, vinegar does not sanitize or disinfect, and DIY cleaners using vinegar don't have approval from the Environmental Protection Agency (EPA) for effectiveness to disinfect floors. To disinfect any surface, you'll want to use products that have been approved by the EPA, such as Pine-Sol® Original.
When used in the wash Pine-Sol helps deodorize, and soften clothing, towels, etc. It is also ideal for grease stains. You can rub it on the stain, and add it to the wash in general.
WD-40 is a lubricant dissolved in a solvent. While it can break down grease and oil to a certain degree, it also adds back some. This might be desirable if you are cleaning a hinge, conveyor, or corrosive-prone part, but not if you need it truly clean.
Hydrogen peroxide has nearly the same chemical makeup as water but with one additional oxygen atom. This allows it to break down quickly and harmlessly. It works well as a degreaser, cleans the streaks out of mirrors, and can be used on countertops and floors as a disinfectant.
Water-based degreasers are common in a trigger sprayer, or in gallon or drum containers for immersion or batch system cleaning. Specialized equipment like ultrasonic or vapor degreasers are available for more automated cleaning.
This is my favourite all purpose cleaner - mix 2/3 of Dawn and 1/3 vinegar in a spray bottle It is awesome for glass shower doors, grease on clothes and sinks.
vinegar. Vinegar is used as a mild acid to cut grease, borax is used as a water softener, especially good with hard water, to prevent soapy deposits. Mix 1 cup of vinegar in 1 quart of warm water.
White Vinegar – This ingredient works by cutting through grease, thereby releasing it from the surface it's on. It is also a really effective sanitizer. Lemon – Lemon is a natural degreaser. It is acidic just like vinegar, and so it too cuts through grease.
Create a cleaning solution with 1-part baking soda, 2 parts warm water and the lemon juice. Add the solution to a spray bottle and spray the liquid onto the kitchen cabinets. Leave for 2-3 minutes, allowing the baking soda to work its magic. Use the soft sponge to gently scrub the grease away.
Dawn® Platinum makes cleaning kitchen cabinets So Dawn Easy! The unique formula quickly breaks down grease particles while staying gentle enough to not cause any damage. Be sure to use a soft cloth or sponge when cleaning.