You can use Pine O Cleen on sealed/finished hardwood floors, but only if it is heavily diluted. Never use it at full strength, and avoid it entirely on unsealed, waxed, or oiled wood, as the liquid and chemicals can cause the wood to warp, swell, or strip the protective coating.
Specific products such as the Pine O Cleen Hospital Grade Disinfectant Liquid can be used to kill the COVID-19 virus on a variety of hard surfaces around the home, like floors, sinks and benchtops.
Avoid using excess water, harsh chemicals like bleach or ammonia, acidic cleaners like vinegar, wax-based polishes, and oil-based soaps. These can strip your floor's protective finish, cause the wood to warp, or leave behind a sticky residue that attracts dirt.
Yes, you can use Pine-Sol on wood floors, but only if they are sealed or finished. It should never be used on unsealed, waxed, oiled, or visibly worn wood.
The best thing to use for cleaning wood floors is a pH-neutral, ready-to-use hardwood cleaner paired with a microfiber flat mop. For daily maintenance, you can often just use a dry microfiber duster or a vacuum with the beater bar turned off to prevent scratches.
Yes. Dish soap is a mild cleaning solution that can be safely used to clean hardwood floors. For best results, mix ¼ cup of dish soap into a bucket of warm water. After mopping with Dawn, mop again with just water to remove the excess soap.
Pine-Sol makes floors sticky primarily because the cleaning solution is too concentrated. As a powerful multi-surface cleaner, it requires proper dilution. Using too much product, not rinsing, or using it on incompatible surfaces leaves behind a surfactant residue that becomes tacky.
To make hardwood floors shine, start by thoroughly cleaning with a vacuum or microfiber mop to remove dust, followed by applying a dedicated hardwood floor polish or restorer to fill in micro-scratches. For best results, use products like Bona floor polish or Quick Shine on clean, dry floors.
Top Picks
Top Ways You're Ruining Your Hardwood Floors
To professionally clean hardwood floors, start by thoroughly vacuuming or dry-mopping to remove loose debris. Spray a pH-neutral hardwood cleaner in sections, and wipe using a microfiber mop, always moving with the wood grain. Never over-wet the floor; use as little liquid as possible to prevent warping.
Murphy's Oil Soap is a trusted traditional cleaner for wood surfaces, but flooring professionals often advise against using it on modern polyurethane-finished wood floors. While it effectively cleans and is safe for unsealed waxed wood, it can leave behind a dulling, oily residue that builds up over time and voids many floor warranties.
Pine O Cleen Pomegranate Disinfectant Floor Cleaner is proven to kill 99.9% of germs*, cuts through tough dirt & grime on floors and tiles and leave a brilliant shine. Help keep your family protected against the spread of germs with household grade disinfection that has a lasting fresh fragrance.
To protect your hardwood floors from warping, scratching, and dulling, you should avoid using excessive water, harsh chemicals, abrasive tools, and all-purpose or wax-based cleaners. Stick to pH-neutral cleaners and damp microfiber mops.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood. Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces.
To clean and shine hardwood floors without causing water damage, start by thoroughly sweeping or vacuuming. Next, mop the floor in the direction of the wood grain using a neutral pH cleaner or a DIY water-and-vinegar solution. Never oversaturate the floor. Finish by applying a dedicated hardwood floor polish every 2 to 6 months.
Revive dull hardwood floors without the mess of sanding by deep cleaning with a pH-neutral hardwood cleaner, filling minor scratches with a matching wax stick or stain pen, and applying an acrylic or polyurethane-based floor restorer like Bona Hardwood Floor Polish or Rejuvenate Wood Restorer.
An easy way to fill in microscratches and shine wood floors is to polish your floors after mopping. After dusting and spray mopping, use a designated microfiber mop pad to apply polish to wood floors to add shine. Bona floor polish is easy to use and adds a protection and shine with every application.
Yes, you should rinse Pine-Sol off your floors. If left unrinsed, the concentrated cleaner leaves behind a sticky residue that quickly acts as a magnet, attracting more dirt and dulling your floors.
The best floor cleaners that don't leave a sticky residue are pH-neutral formulas. The leading option is Bona Hardwood & Multi-Surface Floor Cleaner, celebrated for its water-based, fast-drying, and residue-free finish. For concentrated options, OdoBan No-Rinse Neutral pH Floor Cleaner and Black Diamond Stoneworks Cleaner are also highly effective.
Professional cleaners achieve that sought-after clean-home smell by addressing odors at their source and using natural, non-toxic products to create a fresh, inviting atmosphere. From neutralizing odors with baking soda to infusing spaces with essential oils, their techniques prioritize both effectiveness and safety.
For an effortless, streak-free deep clean on polyurethane-finished hardwood floors, the Bona PowerPlus Hardwood Floor Deep Cleaner is top-rated. Powered by hydrogen peroxide, its oxygenated bubbles break down heavy buildup without leaving a dulling, oily residue.
The 20-minute rule in cleaning (often combined with the 10-minute break as the 20/10 Rule) is a productivity method where you set a timer and clean as quickly and intensely as possible for 20 minutes. When the timer goes off, you immediately stop cleaning and take a mandatory 10-minute break.