If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
You may also use Oxyclean mixed 4 scoops to a gallon of hot water. Let soak for 15 minutes and then scrub with a nylon bristle brush, then rinse. Caulking - Scrape off excess and scrub with a poultice of denatured alcohol. Rinse with hot water and detergent.
OXICLEAN: The concrete cleaner solution for your toughest cleaning jobs. We provide a superior outdoor cleaning product that is safe for your vinyl, aluminum, roof, car, wood, brick, carpet, and other common material needs.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Fill up a gallon sized bucket with water and add about 16oz of dish detergent. Mix the soap into the water thoroughly. Once your cleaning solution is ready, gently pour some onto your paver surface, working in small areas at a time. There are also specific cleaning solutions.
Generally, interior pavers that have been grouted and sealed just need to be swept, mopped, and spot-cleaned as needed with a gentle, non-acidic multipurpose cleaning solution, such as Enviro Klean All Surface Cleaner or Light Duty Concrete Cleaner. Exterior paver patio hardscaping is even more low-maintenance.
Don't use OxiClean on wool, silk, or other off-limits fabrics.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue. OxiClean is the cleaner for your toughest cleaning jobs.
OxiClean can be used on many surfaces, indoors and out. For removing tannin stains from concrete, first sweep the surface and hose it off. Getting the concrete uniformly damp before you add a cleaner is always a good idea, because doing so will yield more even results.
Pour baking soda on the stained spot, then add a bit of warm water. You can add some detergent or white vinegar for a stronger vinegar solution. Let the mixture sit for at least 1 hour. Scrub the top of the pavers, with extra attention to the gaps between the stones or bricks.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Rinse with warm water and wipe off with a soft cloth. This method is best for cleaning small areas, like the brick trim around a fireplace. For larger areas like a floor or wall, go with natural cleaner two, vinegar. Mix equal parts vinegar and water and pour into a spray bottle.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
OxiClean™ Bleach Mold & Mildew Bathroom Stain Remover makes it easier to clean mold stains because it has bleach, which helps to remove mold and mildew stains on non-porous bathroom surfaces such as tiles, sinks and tubs.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
probably at least a cup of the Oxy Clean and Biz, ½ - ¾ cup of Cascade and ⅓ cup of Dawn. if you are using a larger container, use more soap. then, mix it all up.
By comparison, OxiClean suggests that you don't leave it on a garment for more than six hours, because it can start to damage the fabric.
SPRAY directly onto the spot or stain until saturated. TREAT NOW, WASH LATER Let stand for 5 minutes to up to one hour depending on the severity of the stain. For fabrics that are prone to color change, do not let stand longer than 5 minutes.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Dry brushing with or without application of clean sharp sand. OR High pressure water jetting with or without detergent. OR Apply fungicides. Use ordinary bleach or calcium chloride followed by sodium hypochlorite dissolved in water (1kg in 5 litres) then scrub with stiff brush.