If you're going the DIY route, all you need to do is grab a large bucket and combine warm water with a mild degreasing dish detergent. Stir the solution well, then evenly distribute the solution over the pavers.
Baking soda has low-abrasive properties, making it an excellent cleaning material for stuck-on grime and tough stains. Additionally, baking soda is absorbent, allowing it to absorb oils from the surface of the pavers, especially freshly oil spill on concrete pavers.
Using a product like PROSOCO's Cleaner/Degreaser first will remove oil stains from the surface of your pavers and reveal any stains that have penetrated deeper into the pavers. To remove deeper-set stains, a product like Oil & Grease Stain Remover is a better option.
A solution of household bleach diluted 10:1 with water (10 parts water) can be used to remove many types of stains. Some of these include beverage stains, leaf, wood rot, and tobacco stains. Always test a small section of your patio before covering a large area.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Dry brushing with or without application of clean sharp sand. OR High pressure water jetting with or without detergent. OR Apply fungicides. Use ordinary bleach or calcium chloride followed by sodium hypochlorite dissolved in water (1kg in 5 litres) then scrub with stiff brush.
WD-40 can do more than eliminate unpleasant door squeaks – it may also help remove oil stains in your driveway, according to Reader's Digest. That's because it has ingredients that can penetrate grease. Spray a liberal amount on the area and let it sit for 20 minutes, adds Organic Lesson, then wipe the area clean.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
Vinegar and water.
This is an excellent option if you're looking for a more natural way to clean your pavers. Vinegar is known for its cleaning properties, and you can use it as a household cleaner on a variety of surfaces. Plus, it's more eco-friendly than other cleaning options since you're not using harsh chemicals.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
What can I use CLR Grease-Free on? Grease-Free can be used on concrete, terrazzo, granite, asphalt, stone floors and barbeque grills to remove oil, grease and tar. You can also use CLR Grease-Free for factory and garage floors, pool decks, sidewalks, ovens, motors, machinery and driveways.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
Alkaline cleaners are great for lifting oil stains, grease stains, and other petroleum-based stains from concrete. It's an added benefit that you can use it with a pressure washer, making the job that much easier. For an eco-friendly cleaner, we recommend Oil Eater cleaner degreaser (US$15.74, Amazon).
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Fill up a gallon sized bucket with water and add about 16oz of dish detergent. Mix the soap into the water thoroughly. Once your cleaning solution is ready, gently pour some onto your paver surface, working in small areas at a time.