Steps for Cleaning Grout with Homemade Cleaner
Add a few drops of dish soap to the cup. Mix everything together. Pour vinegar along the edges of the grout. Don't do too much at once or the floor will be really wet and more difficult to work on.
Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
In a bowl, combine 2 cups water, 1.5 cups baking soda, 1/3 cup vinegar, and 1/3 cup Dawn. Using a spoon, gently stir, making sure there are no lumps. Add the mixture to a clean spray bottle. Spray the floor with the mixture.
To make your own grout cleaner, mix 1 tablespoon liquid dish soap, ½ cup baking soda, and ¼ cup hydrogen peroxide together in a squeeze bottle. Allow the mixture to stand for 7 to 10 minutes, then apply to wall tiles, floor tiles, and countertops wherever the grout is dirty.
Distilled white vinegar is a safe, natural cleaner and disinfectant you can use all around the house. Pour or spray undiluted vinegar onto your grout and let it sit for 10 minutes before using a toothbrush, scrubbing in a circular motion.
Spray grout with equal parts vinegar and warm water.
Fill a spray bottle with a half-and-half solution of vinegar and warm water. Spray the mixture on the grout, let it stand for 5 minutes, then scrub the surface with a stiff brush. Avoid using vinegar on unsealed grout.
Grout suffers a second issue in that many dyes used to color the grout can be leached out of the grout using an acid, like vinegar. As such, the lightening that is perceived to be the acid cleaning is actually the removal of the dye and the grout's color.
Pour 1/2 cup of baking soda into the bottle, then mix in 1/4 cup of hydrogen peroxide. The baking soda will help remove tough stains and hard water buildup, while the hydrogen peroxide will clean and brighten, cutting through residue on the grout to remove discolorations.
Clean grout with a commercial grout and tile cleaner. Apply it to the dirty areas of the grout following the manufacturer's instructions. If you prefer cleaning grout with a DIY mixture, make a paste of 3/4-cup baking soda, 1/4-cup hydrogen peroxide and 1 tablespoon of mild dish soap.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.
Avoid Vinegar and Baking Soda
Alkaline cleaners are a better choice than vinegar or baking soda because grout contains cementitious mortar that can be dissolved by acidic cleaners, including vinegar. Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone.
Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned.
Did you know you can make homemade grout cleaner with blue dawn? Yes, this is the product you would use in your kitchen sink to clean dishes, however, it can also be used on tile and grout, countertops, furniture, and more.