Can you use Clorox instead of shock?

Author: Emmie Ortiz  |  Last update: Sunday, June 19, 2022

At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach. The recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface.

Can you use Clorox as pool shock?

Using Bleach as a Shock

You need to use less of such products per volume than you do if you simply add chlorine, and if you opt for chlorine alone, you need more bleach than you do pool chlorine. Bleach contains the same chemical -- sodium hypochlorite -- as pool chlorine, but the concentrations are different.

What can I use in place of shock?

Shock. Common unscented household bleach (sodium hypochlorite) works well to shock a pool. To increase the chlorine level by 5ppm in a 10,000 gallon pool, you would need 1/2 Gallon of basic household bleach.

Can I use bleach instead of shock?

At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach. The recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface. When using liquid pool shock, dilute it at a rate of 2.5 to 3 tablespoons per gallon of water.

Can I use Clorox toilet tabs in my pool?

It is possible use use the tablets in your large wading pool. However, this is not economical and it will take a large amount of tablets to clean your pool. Unless you have a major supply of these tablets on hand, I would not suggest using them to clean a pool.

When To Use A Chlorine Free Shock? Oxi Chlorine-Free Shock Oxidizer | Clorox® Pool&Spa™

Can I shock my pool with household bleach?

Therefore, a lot of people keep away from ever using a drop of bleach near their pools. Bleach is safe and the only chemical you should be using in your pool unless cleaning pool tile with baking soda. So yes, you can use bleach to keep your pool water chemistry balanced.

How much bleach equals a bag of shock?

One pound of 65% Cal-Hypo is equivalent to 117 fluid ounces (0.91 gallons) of 8.25% bleach. One pound of non-chlorine shock (43% MPS) is "equivalent" to 36 fluid ounces (0.28 gallons) of 8.25% bleach, but non-chlorine shock is not the same as chlorine.

Is bleach OK to use in a pool?

6 reasons why you should avoid disinfecting your pool with bleach instead of chlorine. Finally, if it is not properly dosed, bleach can become dangerous for bathers! Pool water that is too concentrated in bleach can become toxic, irritating the eyes, skin and respiratory tract of swimmers.

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.

Is Clorox bleach the same as pool chlorine?

In truth, bleach contains the same base chemical as pool chlorine. That chemical is, of course, chlorine, and the only major difference between the two products is the concentration strength. Pool chlorine typically contains some form of stabilizer, as well, though this is not a crucial factor.

What can I use to shock my pool?

Calcium Hypochlorite: Also referred to as cal hypo, this chemical is one of the least costly and most convenient ways to shock your pool. It's usually sold in granular form.

Can you use bleach to shock a hot tub?

Bleach as a hot tub shock

Bleach is our #1 choice if you want to bathe chemical free faster. We love this because it is designed to evaporate quickly which means it will do the job and leave. Choose non-scented and without additives. Household bleach will raise the pH level because it has a very high pH of 13.

Will bleach clear a green pool?

Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.

Can I put bleach in my pool instead of chlorine?

Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.

How long after you put bleach in a pool Can you swim?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

Why is my pool still green after shock?

Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.

Can I use Clorox bleach in my hot tub?

Clorox will not disinfect your hot tub water, has the wrong pH and will give you very dry skin if you do use it. Use only dry chlorine to sanitize and make sure the formula is sodium dichlor NOT calcium hypochlorite which is for swimming pools only.

Can you use javex to shock a hot tub?

The final verdict on this matter is that you can indeed shock your hot tub with bleach if you want to, but it will require a little more work than using a formulated product from a pool store.

What can I use to shock my hot tub?

In essence, shocking your hot tub means adding a higher than usual dose of oxidiser chemicals to the water. This is also known as oxidising. We advise everyone to shock their water once a week to reduce bacteria and impurities. You can do this with one of two products; chlorine shock or non-chlorine shock.

What can I use in my pool instead of chlorine?

There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.

What is the difference between shock and chlorine?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.

Can you shock a pool without the pump running?

Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.

How much Clorox do I add to my pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.

What is stronger chlorine or bleach?

Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.

How do you make chlorine bleach at home?

To mix chlorine bleach combine 5.25 percent sodium hypochlorite and 94.75 percent water. To mix non-chlorine bleach, combine equal parts hydrogen peroxide and water. Pour mixture into the plastic container, and secure tightly. Shake to mix ingredients.

Previous article
Do blinds make a room warmer?
Next article
What is pool mottling?