Unless your wooden furniture has a plastic coating, don't ever use all-purpose cleaner on it. All-purpose cleaner is too wet and may also contain ingredients that will discolor or otherwise harm your wood over time.
You can clean polished wood or non-porous hardwood floors with Lysol® . If you're just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
All-purpose cleaners are designed for maintenance cleaning, not stain removal.
All-purpose orange oil cleaner: If your cabinets are really grimy, let the cleaner sit for up to 10 minutes after spraying. Afterward, wipe the cleaner off using a warm, damp micro-cloth.
Although the team at Lysol describes its product as safe to use on wood floors, they also suggest using a solution of water and Lysol Multi-Surface Cleaner, or the product at full strength, on the wood for between 1 to 6 minutes, depending on whether you want to clean or sanitize.
In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
To clean greasy hardwood floors, you'll need to wipe the grease off using hot vinegar, followed by warm soapy water, and top it off by sprinkling baking soda. Finally, saturate the area with a cleaner or degreaser to bring it back to life.
Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.
Try mixing a weak solution of water and dishwashing soap. Dip a soft cloth in the solution, wring it out and wipe the entire piece. You want a damp cloth, not a wet one. Don't saturate the wood, and rinse your cloth often.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
Use a damp-mop with a flat-head mop and microfiber pad or a microfiber string mop that has been thoroughly wrung out when it looks dingy. Move with the grain, and control the amount of cleaning solution by using a spray bottle, aiming for a heavy mist or gentle squirt of about a half teaspoon per 2 square feet.
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
When you're doing a DIY woodworking project, it's a good idea to start with a fresh, clean surface. But whatever you do, if you're working with untreated wood, don't use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
Yes, you can spray Lysol on upholstery, carpet, curtains, bedding etc..kills germs, smells great.
For a wood coated with a hard surface, like wooden furniture, Windex is completely harmless. If it is sprayed on and kept dry, it will leave a water spot, which could be cleaned off. It won't damage your furniture when used as a cleaner.
We do not recommend using Mop & Glo or any other acrylic cleaning polishes on your sealed hardwood floors. The result will only be a mess. It will be more work to clean up the residue than it was to apply the Mop & Glo!
If you're dusting or cleaning your table, in additional to other wood furniture or knickknacks, a multipurpose solution like Murphy® Oil Soap Orange Oil Cleaner can do the trick. Real Simple recommends spraying or applying your product onto a dusting cloth instead of the surface itself.