Our bathroom walls and floors are usually covered in sealed tiles, and the great news is you can steam clean these surfaces too! Steam cleaning your bathroom wall tiles is particularly useful for the tiled area inside your shower - especially near the bottom where mould and mildew starts to appear.
Clean the shower and bathtub. The steam cleaner works amazing for getting rid of all of that soap scum on shower doors and around the sides of the tub and will clean tile and grout with virtually no scrubbing!
For the ceramic and porcelain tiles, cleaning the bathroom tiles with vinegar and baking soda will make an easier and more affordable approach. All you need is to wipe the surface using a dry cloth and then apply the paste by mixing vinegar and baking soda together.
She explains steam can be very effective for cleaning sealed grout, since it removes the dirt and stains that have settled between tiles over time.
Some professionals swear by a simple mixture of baking soda and peroxide to clean grout. Hydrogen peroxide is an acid, and baking soda is a base compound. Mixing the two together creates a reaction that can penetrate the grout lines and free dirt and debris.
Certain softer surfaces, such as synthetic fabrics, velvet or other delicate surfaces are also not recommended for steam cleaning. Other surfaces such as laminate floor and some plastics could potentially be damaged by the high temperature of steam.
The best weekly tile and grout cleaning product is Blue Dawn dish soap…
Start by combining four parts water and one part white vinegar (hint: add more vinegar to increase the cleaner's strength). Pour into a bucket or spray bottle and apply the water and vinegar mixture to the tile surface. Scrub the area using a cloth, nylon pad, or a mop.
If your grout has been previously sealed, reapplication may not be required. If your grout wasn't sealed, the Pros recommend sealing it after steam cleaning. Make sure to allow the grout to fully dry beforehand.
Make a mixture of baking soda and liquid soap using two parts baking soda with one part soap, with a bit of water. Vinegar is a non-toxic cleaner that kills mould and cleans bathroom tiles. Simply mix an equal amount of vinegar with water, and you have a non-toxic, effective cleaning solution.
The answer here is an emphatic yes. Steam mops and porcelain floor tiles are a match made in heaven. Not only will the steam clean off any grime, it will also sterilise the surface of your tiles, so it's great if you have playful toddlers or pets at home.
Just move the floor brush across the tile at a speed slightly slower than you would vacuum. The steam will clean, sanitize, and deodorize the floor simultaneously. There's no need for an extra rinsing step and the floor should dry quickly, without any excess moisture or residue left behind.
So, where does the dirt go when you steam clean? Actually, it doesn't go anywhere. Instead, the heat and vapour of steam cleaning ensure that all the unwanted substances or stains are fully broken down and easy to get rid of.
Steam power penetrates surface pores, disintegrating dirt and impurities that can hide in hard-to-reach places, like tile grout and shower corners. This makes the bathroom not only clean but also hygienically safe for the whole family, without using irritating or allergenic substances.
You can use dish soap, vinegar, or other all-purpose cleaners. Vinegar and baking soda are the most cost-effective way to clean. But be careful not to use them on marble, granite, and natural stone tiles. If you go for other cleaners, simply prepare the solution you'll be using with warm water.
To make an effective tub and tile cleaner, mix 1/2 cup of dish soap with 1 1/2 cups of vinegar in a glass bottle, leaving some room for 25-30 drops of essential oils. Shake gently to combine. Spray the mixture on shower surfaces, tub, tile, faucets, and glass shower doors, and let it sit for at least 30 minutes.
This mixture is made by combining equal parts water, white vinegar, and rubbing alcohol with ½ teaspoon of liquid dish soap and a few drops of peppermint essential oil. To use this cleaning solution, simply dispense the mixture onto your tile flooring using a bucket or spray bottle as you mop.
Depending on how severe the dirt and grime build up on your tiles is, you can either dust the tiles over with a coating of baking soda and then scrub this away with a non-abrasive brush or sponge for a quick and easy finish.
Long drying times for carpet
In Steam Cleaning Equipment, using steam for carpets, you may have to wait up to 24 hours for the carpet to be completely dry and able to be walked on again. This could be inconvenient for some, especially if the carpet is in a workplace or commercial area.