Can you use a magic eraser on Corian?

Author: Hilma Rice  |  Last update: Wednesday, May 7, 2025

Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.

What's the best thing to clean Corian with?

Grease, fat and oil – use a small amount of dilute bleach and rub with a microfiber cloth. Make sure you rinse the area thoroughly with warm water afterwards to prevent staining. Minerals, lime scale and hard water – apply lime scale remover or vinegar with a microfiber cloth and leave for a few minute before rinsing.

What not to use on Corian?

Keep Solvents and Powerful Chemicals Off the Counter - Avoid exposing Corian® Quartz to strong chemicals and solvents, especially paint removers or furniture strippers containing trichlorethane or methylene chloride.

What surfaces should you not use a magic eraser on?

7 Things You Should Never Clean With Magic Eraser
  • Don't Scrub Polished, Finished, Painted & Other Delicate Surfaces. ...
  • Never Spot-clean Electronic Devices with Magic Erasers. ...
  • Don't Wash Non-stick Cookware with Melamine Foam. ...
  • Avoid Cleaning Natural Stone Surfaces.

Is it safe to use Magic Eraser on quartz countertops?

If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.

How to Use a Magic Eraser

Does Magic Eraser need to be rinsed off?

Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.

What damages Corian?

Never put hot pans, in particular cast iron pots or hot casserole dishes directly on a Corian® top or in a sink. Such heat can damage any surface. Preventing Other Damage Be aware of what your Corian® surface has been exposed to. Harsh chemicals may damage the surface (e.g. paint removers, oven cleaners, etc.)

How do I make Corian look new again?

Wipe the countertop surface with the help of an ammonia-based spray cleaner or warm soapy water for minor residue buildups, or with an abrasive cleaner for heavier buildups. This will help to remove minor scratches, scorch marks, and very stubborn stains from the Corian countertop and will revitalize it.

Why is Corian not popular?

Corian is a branded name used in reference to solid surface countertops. These surfaces are a step up from laminate but still lack the durability and aesthetics that would allow them to compete with natural stone such as quartz. This is one of the primary reasons Corian offers poor resale value compared to quartz.

Can you use bar keepers friend on Corian?

BAR KEEPERS FRIEND Powdered Cleanser 12-Ounces (1-Pack)']

A: Bar Keepers Friend should be safe on Corian as long as it is for occasional use only.

Does anyone still use Corian?

Corian® Solid Surface has been, and continues to be, the most popular brand of solid surface material in the world for over four decades.

Is vinegar safe for Corian?

Some ideas for removing stains from your Corian worktops: Spray lemon juice or vinegar on the stain and leave for a few minutes. Then rinse thoroughly with clean water and dry properly. A solution of spirit vinegar and bicarbonate of soda can be rubbed on in small circular motions and rinsed off with clean water.

How do you remove deep stains from Corian?

The use of a wetted abrasive Scotch-Brite sponge, even without a cleaning product, is the solution for the most stubborn dirt: it is sufficient to use a circular motion of the sponge over the stain and to uniform the surface around it to ensure it remains homogenous.

Can I use CLR on Corian?

Removing Hard Use cleaner formulated for removing hard water marks, Water Marks such as CLR® or Lime-A-Way®. bottle. If residue persists, repeat process.

Can you use peroxide on Corian?

Baking soda mixed with hydrogen peroxide (3% solution) is a more environmentally friendly substitute for bleach. These two ingredients should be combined to create a paste. Apply the paste to the sink stains, cover with a dry rag, and let it sit for a few hours. Then, rinse with warm water and wipe dry.

What is the best cleaner for Corian?

HOPE'S Perfect Countertop Cleaner and Polish 22-Ounce, Streak-Free Multi-Surface Cleaning Spray, Safe on Stone, Laminate, CORIAN, Granite, Quartz, Marble, Pack of 1.

Can Corian be repolished?

We offer a full sand up and republishing service for your Corian worktops to remove mark, scratches and stubborn stains to bring your worktops back to how they looked when they were first installed.

How do I make my Corian white again?

If you are noticing that your Corian® sink is not as white as it once was, you can easily fix this with simple household bleach. It is recommended that you mix ½ cup of bleach with warm water to each sink bowl and let the solution sit for a minimum half an hour.

Why is my Corian dull?

Because Corian has been manufactured with Resilience Technology ™ in a way that allows sanding, cutting, carving and so forth, these inherent benefits also mean that they react much like stone and wood worktops if treated harshly and the surface will show scratch marks, dull areas, and heat damage.

What is the lifespan of Corian?

This material is designed to withstand everyday wear and tear and last for decades, usually up to 50 years, without the need for major repair or replacement. However, should it be damaged, the solid surface can be repaired in the event of minor damage.

Can you use goo gone on Corian?

If the stain persists, moisten a cloth with Goo Gone®4, or a comparable product, and rub it into the stain. Rinse thoroughly with warm water to remove any cleaner residue.

Why not to use Magic Eraser?

Don't use them on wood furniture or paneling.

The abrasive nature of the melamine in these erasers can strip away the finish on wood surfaces. This means you shouldn't use them on wood furniture or wood paneling. Also, be sure to spot-test before using them on wooden cabinets.

What surfaces should not be cleaned with Magic Eraser?

Magic Erasers are abrasive, so avoid using them on delicate countertops such as marble and granite. Not only can you damage the sealant but the eraser may make the countertop appear dull. All of these cleaning products can cause more harm than good.

Can you use Dawn with a Magic Eraser?

I got the Eraser wet, put a dry towel beneath the stain, and worked at it using the corner of the sponge. As I would have predicted, the red spot totally disappeared — I think the Dawn cut through the oil in the stain, and the Eraser had no problem at all “erasing” the tomato residue. A winning combination!

Previous article
Is it safe to use scratched Dutch oven?
Next article
Why are ZZ plants good for beginners?