Tinting is not recommended. Topcoat with any latex or alkyd paint. To create a more uniform topcoat appearance, prime with Zinsser Bulls-Eye 1-2-3 Primer or Cover-Stain before applying topcoat.
Selection Data Generic Type – Vinyl resin, water-based, clear, Interior / exterior binding primer Tinting - Tinting is not recommended. Thinning- Thinning is not recommended. Drying Time- At normal temperatures Peel Stop will dry in one hour and may be primed or painted in two hours.
I have good luck spraying Zinsser BIN and Enduro Clear Poly. I have successfully tinted Clear Poly as a toner - even black.
Can I paint over Zinsser peel stop with an oil based paint? Yes, The Zinsser Peel Stop can be used with oil and Water based products.
Applied over cracked, crazed, or checked surfaces, Peel Stop® acts as a flexible bridging primer to seal face checking and help prevent the finish coat from cracking, providing a sound surface for primer and paint.
If applied correctly, it should dry to a slight sheen finish but your chosen topcoat will cover this without any issues. One coat is usually enough but particularly porous surfaces may need a second coat and it's ready for a topcoat after just two hours thanks to its water-based formula.
Customers have mixed reviews about the product's ability to prevent paint peeling and chipping. Some say it works well for preventing peeling wallpaper and paint chipping, while others mention issues with cracking or shiny paint in cracks.
1 coat of Zinsser Gardz is generally all you need. It binds loose material and creates a moisture-proof film that can act as a barrier coat between a problem substrate and new decorating materials. This is slightly different to Zinsser Peel Stop, which also acts as a stabiliser, but remains breathable and flexible.
Zinsser Cover Stain Primer can be used on water-stained drywall ceilings. If the source of the water has been resolved, this will effectively cover the staining. Can Zinsser Cover Stain Primer be overcoated with a water based interior emulsion? Yes, you can apply a water-based paint over Zinsser Coverstain.
Not a lot of people know this, but Peel Stop is one of the best stabilising solutions for exterior masonry. You'll find it very porous, so it will penetrate deep into chalky masonry.
Zinsser Permawhite is tintable so it is unlikely that the tinting compromised the paint.
Yes, most primers are white in color and can be tinted to a limited color palette.
Collection: Zinsser Colour Match Paint
Providing an extensive collection of high-quality paint solutions, we bring you our collection of Zinsser Colour Match Paints suitable for using on a large range of surfaces.
Apply with brush and/or roller or airless sprayer.
Lower temperatures and higher humidity can prolong dry time. Allow more time at cooler temperatures. If conditions do not permit prompt drying, allow Peel Stop to dry overnight before priming or painting Do not apply Peel Stop is rain is expected within 8 hours of priming or topcoating.
Stop peeling paint in its tracks with Rust-Oleum® Zinsser® Peel Stop® Clear Binding Sealer. This low-odor, water-based formula is highly recommended by painting professionals. Simply brush on to seal paint cracks, bind chalky residue and glue down peeling paint.
The beauty of many Zinsser primers, especially the Bulls Eye 1-2-3, is their excellent adhesion, eliminating the need for sanding even on glossy surfaces. However, good surface preparation can always enhance the final result.
can i paint over zinsser primer/stain remover emulsion paint? How can I clean the brush afterwards? Yes, The Zinsser BIN Primer can be painted over. you would have to use methylated spirits to clean the brushes.
Zinsser BIN is shellac-based, whereas 123 is water-based. This makes Zinsser Bullseye 123 a lot quicker and easier to apply. It's also better suited for use on bare wood, or to prime plastic and composite before painting. BIN may be harder to apply, but it is by far the better stain block.
There are a few other primers that are somewhat misunderstood to be be the type of product that will do what Peel Stop does. One such popular product is XIM brand Peel Bond High Build Bonding Primer/Sealer.
Zinsser Peel Stop is a clear sealer for use on interior and exterior surfaces where peeling, flaking, dusting, or chalking is a problem. This flexible finish, forms a breathable membrane over faulty or difficult substrates, creating a sound surface for new paint.
When dry, GARDZ may be topcoated with any standard architectural water-based or oil-based primer or topcoat. GARDZ is compatible with all types of joint compounds and spackling pastes and any texture or popcorn finish may be applied over it.
water based or alkyd primer or paint may be used over Peel Stop. As Peel Stop is clear, we recommend priming with Zinsser Bulls Eye 1-2-3® or Zinsser Cover-Stain®, followed by a coat of quality water based or alkyd paint to assure optimum results. Cleanup – Clean fresh spills and drips with a wet cloth or rag.
Peel Stop® is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop® tightly bonds to old paint and problem areas forming a sound surface for new paint.