Yes, you can spray Zinsser Peel Stop Triple Thick, either using an aerosol can or a professional airless paint sprayer.
Apply with brush and/or roller or airless sprayer.
Dries to the touch in 30 minutes and can be primed or painted in 2 hours. Lower temperatures and higher humidity can prolong dry time. Allow more time at cooler temperatures.
Can you paint over Peel Stop®? Yes, once your surface is dry and all prep work has been completed, apply your topcoat as usual. Peel Stop® will dry in one hour and can be recoated in two hours.
Applying Peel Stop is straightforward, even for novice DIYers:
Yes, Peel Stop works, but it is not a magic fix for all painting problems. It is a specialized binding primer designed to glue down loose paint edges, seal cracked surfaces, and stabilize chalky, dry walls.
Red is universally considered the hardest paint color to cover. Vibrant red pigments are highly transparent and inherently prone to bleeding through subsequent layers. Other notoriously difficult colors to cover include black, dark blue, dark green, and bright yellow.
In most cases only one coat is necessary. Excessively porous surfaces may require a second coat. Stir thoroughly before use. Apply when air and surface temperatures are between +10° and +32°C and humidity is less than 80%.
Yes. You need to scuff sand and then use a Bonding Primer like Peel Stop or BIN123. (It should work but I reccomend you do a test wall with the worst peeling before doing the whole house just to be sure.)
Using Zinsser Peel Stop to Prime Wood
Especially the edges, which are prone to fluffing. Just apply a quick coat of Zinsser Peel Stop, wait a couple of hours, then you're free to sand. You're left with the perfect base every time.
Applied over cracked or crazed surfaces, Peel Stop acts as a flexible bridging primer to seal face crazing and prevent the finish coat from cracking, providing a sound surface for primer and paint. Glues down edges of old coatings.
Zinsser Mold Killing Primer is used to paint over and kill all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms, it does not prevent mold from growing on the top coat. As a primer, Mold Killing Primer must be top coated.
Zinsser Peel Stop Triple Thick White Binding Primer stops previous coatings from peeling and creates a smoother topcoat finish. This high-performance, low-VOC, water based acrylic binding primer locks down and hides peeling and worn surfaces. Outstanding flexibility and its three times thicker than regular primers.
Many people believe that PVA is a suitable cheaper alternative for Peel Stop. And it is ABSOLUTELY NOT. PVA is not a product designed to be painted and it's also water soluble. It reactivates when it comes in to contact with moisture, especially paint.
The best way to apply Peel Stop is to use a synthetic bristle brush to spot prime but it can also be applied using a roller or even an airless sprayer if the area to be covered is large. If applied correctly, it should dry to a slight sheen finish but your chosen topcoat will cover this without any issues.
Another product we see used often is PrimeRx Peel Bonding Primer by Sherwin-Williams. It is very similar to the XIM Peel Bond with what it does, but again, it is not intended to be used to tie-down loose edges.
Yes, you can absolutely paint over Zinsser Peel Stop, and in fact, it is required. Peel Stop acts as a binding primer—it glues down the edges of flaking paint and seals porous areas, but it is not meant to be a standalone finish coat.
DESCRIPTION AND USES
Peel Stop is recommended for use on exterior surfaces including previously painted wood siding, windows, doors, fences and trim, metal gutters and downspouts, masonry walls and foundations (including cured concrete, stucco, concrete block, brick, vinyl and aluminum siding).
Painting over peeling paint usually leads to immediate bubbling, flaking, and a worse-looking finish. The new wet paint reacts with the loose, old paint causing it to pull away further. Fresh paint can only stick to the layer immediately beneath it; if that layer is loose, the fresh paint will quickly peel right off along with it.
Zinsser Peel Stop (typically available for around $20 to $30 per quart) is highly praised in customer reviews for its ability to glue down flaking paint edges, stabilize chalky surfaces, and prevent further peeling. While users find it to be a life-saver for restoring damaged walls and weathered exteriors, they note it is not a miracle filler and often requires two coats or top-coating for a perfectly smooth finish.
Key Points
Red is universally considered the hardest paint color to cover. Vibrant red pigments are highly transparent and inherently prone to bleeding through subsequent layers. Other notoriously difficult colors to cover include black, dark blue, dark green, and bright yellow.
There are three main types of “impossible” colors: Forbidden colors. These are colors our eyes simply cannot process because of the antagonistic way our cones work, for instance “red-green” or “yellow-blue.”
Cool gray is being replaced by "mushroom" neutrals (warm taupes and greys with subtle green or violet undertones), warm earthy khakis, and soft, natural sages.
Beige tones, hues of white, and grey should be the colors of choice for your furniture, curtains, drapes, and other home accessories. Neutral colors not only give that plush look, but they also give you that warm feeling.