Paint your enamel sink to either redecorate the room with a fresh color scheme or repair a chipped or rusted sink. To properly paint enamel, you need an epoxy paint that will adhere to the enamel and withstand the high demands of a sink.
When it comes to painting your stainless steel sink, we recommend using spray paint rather than applying paint with a brush. This will leave the surface of your sink nice and smooth. It also ensures that you are applying an even thickness of paint all over your sink.
To properly paint enamel, you need an epoxy paint that will adhere to the enamel and withstand the high demands of a sink. If it has chips or rust, prepare it prior to painting. Use other household sinks until the epoxy paint dries to...
A: Procter & Gamble said the Mr. Clean Magic Eraser should not be used on an enameled cast iron sink because it can remove the glossy finish.
If soaking doesn't do the trick, fill the pot with warm water, 1 to 2 tablespoons of baking soda or Bar Keeper's Friend, then simmer for about 10 minutes. Cool and drain this mixture from the pot, then follow the next two steps. Give it a rinse. Use warm water to wash off any remaining bits and the soapy suds.
Things You'll Need
If you are looking to create a great looking shine or a swirl free finish, try buffing your enamel paint with a foam pad after the initial buffing. Wool pads run a little warmer and do not provide the same quality results as the foam pads do.
I did a ton of research and ended up choosing Rustoleum Speciality Tub and Tile (SEE THE UPDATE NEAR THE END OF THIS POST) paint for the sink and vanity top. Rustoleum had two options available for this sink paint. Option one is sold as a kit, requiring part A and part B to be mixed and painted on with a brush.
Not all paints will bond tightly enough to the ceramic surface to stay attached through washing and cleaning cycles, mainly because the material is non-porous. Epoxy-based paints designed specifically for the shower, tile, and tub use are all you should try.
You can spray paint bathroom faucets! We took the sink faucets off and lightly sanded them and then spray painted them with a textured flat black spray paint. We used Krylon Outdoor textured finish to give it an iron look. They look amazing now and have held up quite well.
Spraying the sink with an enamel-based paint will restore the luster of the finish. Avoid scrubbing the sink with any type of abrasive cleaner for at least a week.
A porcelain sink is typically solid with no frame underneath, an enamel sink will have a frame usually made of steel or iron – as a result, a porcelain sink will be much lighter than enamel. Visually, the two sinks are very similar.
However, do not use acidic cleaning agents on enamel and steel-enamel baths. These can cause unsightly rust-like stains. Mild cleaning agents such as soft soap, shampoo and a soft cloth are a better choice. Cleaning indoor hot tubs and baths with jets: Whirlpool systems should be cleaned monthly.
Wipe down countertops.
While you're cleaning up your kitchen appliances with glass cleaner, wipe down your countertops with it, too. It's safe to use on sealed granite, tile, laminate, sealed marble, and other countertop surfaces, in addition to stainless steel and enamel.
Use fluoride treatment
Fluoride is tooth enamel's best friend, helping to strengthen and restore it after normal wear and tear. The best way to implement fluoride treatment while working to restore tooth enamel is to use a fluoride-based toothpaste and mouthwash.
Our favorite way to clean our enameled cast iron is simply with warm soapy water. Allow your enameled piece to cool, then use a gentle dish soap and reach for a scrub brush, scrub cloth, or pan scraper to easily remove food from the cooking surface.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
I do clean my sink daily with dish soap and water, but over time it started to show the signs of aging. I tried lots of different products to restore it to a shiny white, but I only found one thing that worked: baking soda and hydrogen peroxide! It's so simple!
First, wet down the sink and sprinkle baking soda onto a moist sponge. Then scrub the sink with baking soda. Next, pour home hydrogen peroxide on the sponge and rub all over the sink. Wait about 15-20 minutes, and then rinse the whole sink.
Porcelain sinks last 25 to 30 years before they'll need to be refinished, after which they can last longer. Enamel steel sinks only last about 5 to 10 years if used frequently. Stone sinks can last for several decades or much longer--just keep in mind that you'll likely need to reseal them every 6 to 12 months.
Sponges and Cleaners to Use
Bar Keeper's Friend, or a paste of baking soda and water, also comes in handy for cleaning tough stains, oil residue and marks on your Dutch oven as well.
Maintenance: The polished enamel surface is nonporous, making for a stain resistant and easy-to-clean sink. They are very easy to clean and their smooth, glossy finish helps hide water spots and streaks.