Put on gloves to prevent direct contact with the spray paint. Shake the paint canister well and test the nozzle on the old newspaper. Spray the fan blades and hardware pieces with a thin, even coat of primer. Apply multiple coats until you've achieved the coverage you want.
Yes you can! Spray paint works best for an even coating, so off-balance spinning is not introduced. Be sure to prep the surface according to the paint directions.
Take the fan outside and spray it with soapy water or Simple Green, then spray it with a hose to wash it off. Allow the fan to dry completely before turning it on. I have done this many times, and know that motors can be safely cleaned with water without cause an electrical risk as long as you let them dry out.
Being far more dense than air, water will cause far, far, far more drag on the fan blades causing the motor to slow way, way, below its normal operating speed. Being mildly electrically conductive the water will almost immediately destroy the moto...
Wet-rated ceiling fans can be exposed to directly to the elements, whereas damp-rated should only be used in moist or damp locations without direct exposure to water.
In general, it can take anywhere from a few days to a few weeks for a ceiling to dry out completely. To speed up the drying process, use dehumidifiers, fans, and open windows to improve ventilation.
With WD-40 Multi Use Product, lubricating your ceiling fan becomes easier. The all-purpose liquid allows you to clean your fan and ensure its smooth functioning within a few minutes. A couple of WD-40 sprays would make your ceiling fan sparkling clean and reduce friction within its body.
To oil a ceiling fan without taking it down, first, ensure the fan is turned off and the blades are still. Use a ladder to reach the motor housing, and locate the oil hole (if your fan has one). Add a few drops of oil into the hole using a small oil applicator or spray, wiping away any excess to keep the fan clean.
Many brands of ceiling fans require maintenance from time to time which includes oiling.
Clean and Dry Fan Outdoors
You could try laying the fan outside on the ground and putting a dinner plate over the motor area. Then, spray the fan with a cleaner like 409 or Clorox. Let it soak a few minutes to loosen up the grime. Then, using the jet setting on your hose, blast it clean.
Or simply slip an old pillowcase over the blades one by one, then pull it back to remove dust and dirt. Moisten a cloth or sponge with an all-purpose cleaner and wipe each blade clean. Don't spray liquid on the fan, and don't apply heavy pressure, which can bend the blades.
Another approach is to place a bowl of ice water in front of a fan. Keep refilling with ice as it melts. Mind that freezers generate heat on the outside as they cool down the internal space. If your freezer is in the same room that you want to cool down, it will create more heat in the long run and consume more energy.
For this project, you are going to want to use a flat or enamel based spray paint. Preferably one with primer already in it.
Zinsser 13 oz. Covers up Paint and Primer in One Spray for Ceilings-(6-Pack) is designed to seal and cover stains on ceilings. It features a vertical-tip spray nozzle ideal for overhead projects.
For weekly cleaning, you do not need to disassemble the fan to clean the blades. Use a hairdryer or compressed air to blow away dust from the surface of the blades. Use the coolest air setting on the hairdryer and keep it about six to ten inches away from the blades.
Most people enjoy the cooling and comfortable breeze of a fan. But excess wind makes the air dry. When you sleep, this dry air may affect your breathing, causing sleep disruptions. Using a fan at night can even aggravate your allergies, making you uncomfortable throughout the night.
Drip three to four drops of non-detergent electric motor oil into the top bearing. Then, spin the motor around about 10 times so that the oil works into the bearings. Repeat this for the bottom bearings. Turn the motor upside down and add a few drops of oil where the blades connect to the motor.
(If you ever wondered why your ceiling fan blades attract dust, rather than flinging it around the room every time you start them up, you can blame static electricity for those layers of gray fuzz along the edge of the blades.)
Myth: WD-40 Multi-Use Product is not really a lubricant. Fact: While the “W-D” in WD-40 stands for Water Displacement, WD-40 Multi-Use Product is a unique, special blend of lubricants. The product's formulation also contains anti-corrosion agents and ingredients for penetration, water displacement and soil removal.
Avoid soaking the blades, as excess water can damage them or cause rusting on metal parts.
After water damage, running fans for at least 24 hours is recommended. The duration could change depending on the water damage and humidity extent. It's critical to monitor the humidity levels and keep the fans running until they stabilize.
It would be best to use high-volume fans alongside a structural drying dehumidifier. This will help you get the wet ceiling dry within a few hours. Ensure to aim the fan towards the ceiling and have the dehumidifier underneath the wet areas.