Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
Running your pool filter and pump after shocking is an essential step in keeping your pool looking great. The pump and filter need to be run for two reasons: Circulate and distribute the pool shock. Clean and filter the pool's water.
Pool pumps typically disperse chlorine into the water for you, but it is possible to add chlorine without a pump. The easiest way to do this is with chlorine tablets. They go in a designated floating container and slowly dissolve while floating around the pool. You can also use inline chlorinators.
Adding Shock Directly Into The Pool Water
Don't worry—you can't overshock your pool. But beyond fashion faux pas, adding shock directly to the pool water if you have a vinyl liner can be a disaster. The shock granules will sink the bottom and bleach out your liner.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
A pool can only be safe for swimming without a pump for a few days and a maximum of one week. The definite number of days the pool will be safe will also depend on the temperatures of the water, the weather at that particular time, the level of chlorine, and how clean the pool was before the pump stopped functioning.
Intex pools -- the same as with all other swimming pools -- require a filter, pump and the appropriate chemicals, such as chlorine, to keep the pool water clean and sanitary for swimmers.
Flooding Your Grass Is Not A Good Idea
The problem with draining your pool in the yard, if permitted by your local water regulatory laws, is that it will quickly reach its saturation level and increase the risk of flooding your lawn, drowning the roots of your grass, and attracting mosquitoes.
If you can pump around 30 GPM (gallons per minute), which is also equivalent to 1800 GPH (gallons per hour), it should take you 2.78 hours or 2 hours and 46 minutes to drain your pool using a hose.
A swimming pool pump is a standard feature in the operation of swimming pools, that allow you to pump water through a filter, circulate the water and keep the water clean. A swimming pool pump is an essential component in ensuring you have clean and safe water to swim and bathe in.
Short answer--yes. The first response, however, would be why would you use a pool without a filter? The sand filter or other filtration system is essential to the health and safety of the swimmers. It is also necessary to have a circulation pump for maximum chlorination.
As long as you can see the bottom of the pool at the deep end and FC is above minimum but below SLAM levels, you're good to go. Sounds like you're watching the chemistry well, so go for it!
SKIMMER NOTES: No. Chlorine and shock are not the same thing.
Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
The first choice for draining swimming pool water should be to drain pool water into the sanitary sewer. In-ground pools typically have a sanitary sewer drainage inlet near the pool equipment. Pools and spas not plumbed with a sanitary sewer drainage inlet can be drained to a sanitary sewer line plumbed to the home.
First, if the draining is done at the wrong time or under the wrong conditions, you can actually risk damaging your pool structure and liner. All the water from your pool needs to go somewhere when it's drained, and that usually means the ground.
Swimming pool builders often install overflow drains near the rim of the pool that prevent flooding most of the time. If you don't have an overflow drain, or if it is clogged, it is possible for periods of unusually heavy rain to overflow your pool.
Simply stop adding chlorine to your uncovered pool and wait. Sunlight will help to naturally dissipate the chlorine within 10 days. During that time, use a swimming pool test kit to measure chlorine. Chemically dechlorinate the pool water.
Though it's illegal to discharge swimming pool/spa backwash and drainage water off your property, in general you can dump this water into the public sewers. You can also reuse this water to help your thirsty plants! Emptying a Pool/Spa the Plant-Friendly Way: Draining an Aboveground Pool/Spa 1.
A 10,000 gallon pool will take about 14 hours to drain, the maximum rate recommended by the City of Phoenix. It will take twice as long to drain if the pool size is doubled or cut in half.