Yes, you can send any authentic Benchmade knife to their factory in Oregon City, OR, for free sharpening through their LifeSharp Program. Technicians will clean, oil, sharpen, and tune your knife to factory specifications completely free of charge.
Yes, Benchmade sharpens knives for free through their LifeSharp program, which covers cleaning, oiling, tuning, and re-sharpening your knife to a factory edge for its entire lifetime.
Just slip the knives into the included protective sleeves, place them in the prepaid envelope and put them in the mail. Expert bladesmiths will hone and sharpen each knife, then ship them back to your door.
Service Time at Benchmade (2 or 4 business days)
You'll receive status updates as soon as your knife is received, when service begins, and when it ships back. LifeSharp: Within 2 business days, your knife is cleaned, oiled, and sharpened to factory edge specifications.
The Basics of Professional Knife Sharpening Pricing
Typically, professional knife sharpening services can range anywhere from $5 to $15 per blade, depending on a few key factors like the size of the knife, its condition, and the level of care it needs.
Ace Hardware typically charges between $6.00 and $8.00 per knife, with most participating locations setting the price at $6.99.
3-Finger Test
Lightly place the knife edge on your fingers (sideways, not pointing down) and gently pull. A sharp blade will feel very "grabby" and not slip easily over your skin.
SEND IN YOUR KNIFE FOR. OUR LIFESHARP SERVICE.
Our LifeSharp service guarantees that Benchmade will re-sharpen your knife to a factory edge for free, for the life of the knife.
Yes, Navy SEALs frequently use Benchmade knives. While the military issues standard gear like the Mark 3 Mod 0 dive knife, many SEALs use Benchmade for their personal, everyday carry blades on and off duty.
While WD-40 can act as a quick, last-resort lubricant or cleaner for sharpening stones, it is not recommended for the job. It is too thin to properly float away metal shavings, and it leaves behind a residue that can clog stones or cause blades to skate across the surface.
The best knife sharpener for Benchmade knives is the Work Sharp Precision Adjust Elite. Its guided clamp system perfectly maintains the exact 20∘20 raised to the composed with power20∘ factory edge common on most Benchmade models. It safely sharpens premium steels like S30V, S90V, and M390 without damaging the blade's finish.
Our pricing reflects the true cost of premium American manufacturing and long-term performance: Headquartered in Oregon City, OR: Every Benchmade knife proudly ships from our factory in Oregon City, Oregon. High-End Materials: We use top-tier blade steels, aerospace-grade handles, and precision hardware.
The fastest way to dull a knife is by cutting on ultra-hard surfaces like glass, granite, ceramic, or directly on dinner plates. Because these materials are harder than the knife steel, repeated impacts cause microscopic edge rolling, chipping, and catastrophic dulling in just a few uses.
Benchmade's LifeSharp program provides free sharpening, cleaning, oiling, and adjustment for the lifetime of your knife. The service itself is always free. Use an Authorized Dealer: Many Benchmade dealers can submit your knife on your behalf.
Yes, Benchmade is considered a high-end, premium knife brand. Known for precision American manufacturing and top-tier materials, most of their pocket and outdoor knives range from $150 to $400. Their "Gold Class" models are custom, limited-edition collector pieces that easily exceed $500.
Yes, it is absolutely worth getting your knives professionally sharpened if you own high-quality blades, lack the time to learn DIY sharpening, or need to repair chips. Pros correctly match your knife's specific bevel angle (e.g., 15° vs 20°) and remove only the minimum amount of metal required, extending the life of your blade.
The best knife lubricant depends on your application: for food prep, use food-safe mineral or coconut oil; for folding knife pivots, use high-performance synthetics like KPL Knife Pivot Lube; and for low-mess storage, choose dry lubricants or waxes.
For whetstone sharpening, you should generally sharpen your knives wet. Using water or honing oil provides crucial lubrication that carries away metal shavings, prevents the stone from clogging, and acts as a coolant to protect the steel's temper from heat.
Authentic Benchmade knives are not made in China. Every genuine Benchmade is 100% manufactured and assembled in the USA at their headquarters in Oregon City, Oregon.
Neither brand is universally "better," but they cater to very different needs. Benchmade is a premium, USA-made brand focusing on high-end materials and locking mechanisms. Kershaw is highly regarded for its everyday value, offering everything from budget folders to premium US-made designs.
The "holy trinity of knives" refers to either the foundational trio of folding pocket knives that defined the high-end knife industry, or the three essential blades every kitchen needs.
The best sharpeners for Benchmade knives are guided systems or diamond stones. These premium steels (e.g., S30V, M4, CPM-20CV) are highly wear-resistant. Avoid pull-through carbide sharpeners, which strip away too much metal and ruin Benchmade's exact factory angles.
Yes, Benchmade sharpens knives for free through their LifeSharp program, which covers cleaning, oiling, tuning, and re-sharpening your knife to a factory edge for its entire lifetime.
Pull-through sharpeners are not universally "bad," but they are generally discouraged for high-quality or expensive knives. They offer quick, convenient edge maintenance but are highly aggressive, removing excess metal and often leaving a fragile, jagged edge.