So, it's very important to seal your pavers right away. Now we suggest maybe waiting 30 to 60 days, to let the rain really hit it, and wash off the construction debris, let that stone sit and breathe a little bit. But at that 60 day point, its ready to be sealed.
“Do I need to seal my pavers?” The short answer is Yes. Paver sealant is an important maintenance tool to keep paver patios, walkways, driveways and pool decks looking as beautiful as they day they were installed.
How long should I wait before sealing my new pavers? Typically 60-90 days. The main reason to wait is so that efflorescence can work its way to the surface and be cleaned off.
Sealing Pavers Con #2: Sealing is not cheap
Quality sealers are thicker and more durable whereas inexpensive sealers are thinner and break down faster. Once the surface is sealed, you'll have to reseal the pavers, which means there is an initial expense plus an intermittent cost each time you do maintenance.
In most cases, a sealer should only be applied to pavers that are completely dry.
Then, about 24 hours prior to sealant application, thoroughly cleanse pavers of any remaining residue with Techniseal's Paver Prep, a powerful efflorescence cleaner that will give you a nice clean surface on which to work. Our paver preparator also maximizes sealant penetration and adherence.
Acrylics. Acrylic paver sealers, either solvent- or water-based, offer the most comprehensive ultraviolet (UV) resistance. Acrylic sealants can be breathable, depending on their solid content.
Choosing to seal your pavers will keep your color consistent and un-faded. Not only does choosing to seal your pavers keep the color untouched, but it can also increase the vibrancy of your colors. One largely agreed upon benefit of sealers is that they limit stains.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
The culprits of blotchy concrete after sealing
When you find yourself staring at discolored concrete that has already been sealed, there are usually three potential sources of blame: The sealer was applied poorly. Not enough sealer was applied. The concrete itself had varying absorption rates.
If you experience any dew, accidental sprinkling of water or rain as the sealant dries, the sealant can become stained, cloudy, blotchy, or discolored and it will no longer be aesthetically pleasing. Simply don't seal your paver if there is even a remote chance of rain, fog, or a drizzle.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
You pressure clean the pavers, re-sand the paver joints and then apply two coats of your favorite paver sealer and the job was complete.
How often do I need to reseal my pavers? If your sealant has been applied correctly by a professional, it should last between two to three years. The care given to the area and other elements like traffic or weather will also play a part in its longevity.
Your concrete pavers will look better than new. 5 gal. bucket covers approximately 500 sq. ft.
Advantages of Sealed Paver Joints
Although paver sealing does not guarantee complete weed prevention, it remains the most effective way to achieve longer-lasting results in weed control. Simple maintenance tasks and occasional treatment of persistent weeds may be necessary.
If a white haze appears on sealed pavers, it is less likely that the white spots are efflorescence but rather, water condensation collecting underneath the sealer. Removal is still possible, but a chemical solution is required. If your sealer is oil-based, the fix is to re-emulsify the sealer with Xylene.
Should I Seal My Paver Driveway After Pressure Washing? Yes. You absolutely should. After re-sanding it, make sure your driveway has no excess sand by thoroughly sweeping it.
Traditionally, concrete paver manufacturers have recommended waiting at least 90 days after polymeric sand installation to apply a protective sealant to a paver surface. Nowadays, a 30 day delay is sufficient to allow the evaporation of any remaining natural efflorescence contained in the pavers.