The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Trust us when we say it's important to keep your water pump continuously running throughout the pool season. For hotels and other types of public pool spaces, it's actually a law to keep a pump running nonstop; but for homeowners who are concerned about saving energy, resources and money, have no fear.
12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
So, if you run your pool pump for 8 hours in one day, 1,864.25 multiplied by 8 and divided by 1,000 equals 14.9 kilowatt-hours. If you run your pump every day for an average of 30 days per month – 30 multiplied by 14.9 – your pump uses 447 kilowatt-hours in a month.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.
Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
The rule of thumb, which has worked well for me, is to run your pump one hour for every 10 degrees of your average temperature.
No matter what kind of filter you have, it only works if water moves through it. That's how the filter is able to capture debris and bacteria. To keep all the water in the pool clean and clear, it must run through the filter system at least once a day.
So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Keep the pump and filter on while you are away.
Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.