'Can you install a farmhouse sink in an existing countertop? ' is a common question, one with the short answer of 'yes'.
Yes. A farmhouse sink can be installed undermount, top mount or a flush mount. Read the manufacturer's installation guide for instructions as it pertains to your sink model. You can also review the general installation guide that provides excellent tips and step by step instructions for installing a farmhouse sink.
In short, yes, it is possible to replace a kitchen sink without replacing the countertop. However, in order to prevent any damage from occurring to the countertop, it's recommended that a professional handle the replacement.
Simply put, yes, you can replace an undermount sink without having to remove the countertop. After the plumbing and garbage disposal are disconnected, the clips that hold the sink to the countertop from below must be removed. Then, the final step is to break the silicone adhesive bond and pull the sink out.
The stronger the silicone bond, the harder it would be to remove the sink without causing your granite countertop some damage. While old silicone bonding can be removed using a knife, there are certain spaces that won't allow you to do this without actually lifting the granite countertop.
Granite countertops that last
However, if you need to modify this space for a new sink, refrigerator, or cooktop, the good news is that your granite can be recut to accommodate the different setup.
Pry open the countertop with a screwdriver until you have enough space to move the sink. Saw granite and cabinet based on dimensions of the sink. Cut and install a new cabinet top using a reciprocating saw. Install the new sink and connect plumbing pipes.
Undermount sinks can be difficult to replace because many installation methods are more or less permanent. Sinkmount Kit hardware is designed to install and uninstall easily, in order allow undermount sinks to be replaced without risking damage to the existing countertop.
Yes, it's technically possible to recut granite to make room for a larger sink. Some contractors will enlarge the sink cutout with your granite in place.
If you're replacing an undermount sink, you might have the option to choose between drop-in or an undermount sink. The only issue here is you might need to fill holes in the counter or redo some of the plumbing.
Step 6: Add Support to Cabinets
Because farmhouse sinks are pretty heavy, you'll need to add support to the inside of the cabinet to be able to hold the weight. You can do this by adding two two-by-four pieces of wood to the sides horizontally.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
However, there are some key differences between the two types of sinks. Apron sinks are generally smaller than farmhouse sinks. They are available in various materials, including stainless steel, copper, and porcelain. Apron sinks are available in different styles, including single-bowl and double-bowl options.
These sinks are heavy and require extra support. This is definitely an advanced project. The plan for this project is to remove the old sink and countertop, prep the cabinet, install the new sink, set the new counters, then install the faucet and connect the plumbing.
The cutout cost will depend on the size and shape of the hole and the countertop material. The more cutouts you have in your granite countertop, the more expensive it will be. The average cost for a basic sink cutout is $200, but it can range from $100 to $500. This charge comes on top of the fee for sink installation.
Granite is very hard and durable, but it can be expensive. You can reuse your existing granite countertop designs by cutting out the areas you want to change. Kitchen countertops should be reused - and only replaced when they absolutely need replacing.
This is why removing a granite slab, once installed, is not ideal. It may even increase, rather than reduce costs if the reinstall gets complicated. You should always be wary about moving a granite slab once it's installed; that is a recipe for breakage, and unexpected costs. .
Undermount. This type of sink rests below your countertop and doesn't a seam that builds up gunk. Undermount sinks are heavy, and often require a silicone seal between the sink and your countertop. Installations costs between $350 and $1,500.
Sinks are heavy. Since undermount sinks to not have anything above the counter to help carry their weight, they need more support. They also need more solid countertops that don't suffer easily from water damage. This often makes them a more expensive sink than other options and also makes installation more difficult.
Undermount sinks also remain popular, with Beesley sharing that they're “a popular choice for customers as they are installed under the level of the worktop creating a seamless design. These types of sinks save space, and create a clean and sleek look which is great for minimalist-style kitchens.”