Can you remove or replace a granite countertop without damaging the cabinets? Of course you can! Granite countertops are a favorite for many homeowners because of their beauty and durability. Granite is a tough material, but it still needs to be cared for.
Can you replace kitchen countertops without damaging cabinets? Yes, you can. You only need to be cautious about how you remove and install the countertops.
Can countertops be removed without damaging cabinets? Yes, as long as you're careful. You'll remove any adhesive holding the countertops to the cabinets before you lift it away.
On the bottom side of your kitchen granite countertop, there is a layer of plywood between the cabinets and the granite. To remove it, loosen the screws located inside the cabinet, connecting the plywood sheet and the cabinet. Use a drill and a screw tip.
MongoCT. The tiled backsplash usually sits just off the countertop by an 1/8th inch or so and the gap is caulked. The caulk can be cut away and the countertop should be able to be removed without damaging the backsplash. That's in a perfect world.
You can remove granite countertops in one piece if you want to reuse them. Although contractors doing demolition prefer to break granite tops into pieces for removal, you can remove them in one piece with a well thought out plan.
To find it, look inside the cabinet's facing. Tap the end of the pry bar into this joint with a hammer. Pry upward gently to break the glue. If there is any plywood behind the granite, labor underneath it to separate the granite from it.
Installation Problems
They may use a technique in which screws are inserted through the granite's supporting plywood from the bottom. When inserted properly, the screws will allow the plywood to separate from the granite so you can remove it.
Removing a granite countertop is not as easy as removing a laminate countertop since laminate countertops are the lightest of materials. You might want to save cost by attempting to remove it yourself but if you haven't tried removing it once, call an expert.
Adhesive for Granite Countertops
Epoxy glue is the most commonly used type for granite countertop installation. It's strong enough to attach the granite to cabinets and to hold two pieces of stone together. You need something just as strong as the stone itself, and epoxy fits the bill.
ANSWER: Yes, you can try to match different color granite slabs by applying a product like the Color-Enhancing Stone Sealer or the Tenax Ager which is most effective on polished surfaces.
Use the hammer drill and a series of holes. If you want to keep the dust to a minimum, you can skip this step, but it will make things much easier if you do. Now you can break up the granite with the sledgehammer. Be careful because many things can go wrong and end up costing you more in the long run.
Typically, silicone holds the granite slab to the base. Two-part epoxy adhesive fills the gaps, seams and joints and forms a secure bond that can be difficult to break without damaging the granite.
The weight of granite depends on its density. The average 3/4″ thick granite weighs 13 pounds per square foot, 1 1/4″ thick granite weighs around 18 to 20 pounds per square foot, and 2″ thick granite weighs about 30 pounds per square foot. The darker stones are usually heavier than the lighter stones.
Granite is one of the toughest materials to use for countertops, but maybe for you, the style can feel just a bit dated and out of context. All you need to do is get your granite honed and it will look like a brand new countertop.
Technically yes, you can put fresh counters on your existing cabinets. No different than being able to modify your popular kitchen cabinet handles on old cabinetry.
While you might want a backsplash to match your counter (and there are many custom, lovely ways to do that), don't be tempted to tile above a 4” granite, or stone, slab backsplash. Instead, before you tile that area, take the 4” slab backsplash off. Why? Because, typically, you only have 18” of height there.
Break them up good. Wearing gloves and using putty knives and screwdrives pull out all the little pieces of tile from that row closest to the wall. Wiggle them out from under the backsplash tile, they should come out fairly easily.
Insert a stiff putty knife in the gap between a pair of tiles, wedge it under one of the tiles and pry, exerting light to moderate pressure. If the tile doesn't come off, don't force it. You may be able to weaken the glue bond with heat.
Granite has been used on kitchen countertops and backsplashes for decades now. Unlike glass tiles and subway tile backsplash, this timeless material still has a fresh look.
Clear the counter so you will have easy access to the backsplash. Remove outlet covers and cut the electricity to the area where you will be removing the tiles. Carefully use the hammer and putty knife to chisel off the tiles without gouging the drywall.
You can identify granite from marble and other types of stone by using the scratch test. Use a knife blade to try and make a scratch in the surface–pick somewhere discreet and out of sight. If it's difficult to make any mark in the surface, you're likely looking at granite—or some type of igneous rock.
If you are using two different granites in the kitchen, the best way to start is to look for two stones with similar or complementary colors that have distinct patterns and vice versa. A good rule of thumb is to not mix two stones that look very similar.