Widespread faucets feature separate hot and cold handles that are independent from the spout and can be mounted on the countertop or on sinks. It can be mounted on sinks with three holes that fit 8 inches to 16 inches from one side to the other.
yep. some faucets come with a cover plate for the two extra holes. you can get covers for the holes. you could put a sprayer in one hole and a soap dispenser in the other.
The faucet configuration has to line up with the number of holes in the sink. The two components don't necessarily have to match exactly, as extra holes can be hidden with plugs and baseplates.
Single Hole Faucets are pillar-like faucets, in which the spout and handle are combined into one unit and fit on a sink with a single faucet hole, and can also be used on a 3-hole sink with the use of an escutcheon, also known as a deck plate.
If the distance is six inches or more you need a “widespread" or “eight inch spread" faucet. If the measurement is less than six inches you need a “centerset," “mini-spread" or a “four inch spread faucet." Each of these configurations is for a faucet that will use all three holes in the sink.
Centerset faucets fit three-hole sinks and have either a single lever or two handles mounted on a plate. On the other hand, widespread faucets have three separate pieces: two handles and a spout.
Most of the time, the hole for your kitchen faucet will be 1 3/8 inches across. That's the standard size you'll typically see. But here's the catch - not all faucets play by the same rules. Some of them require a little more breathing room with a 1 1/2-inch hole instead.
The easiest and most inexpensive way is to order faucet-hole caps to cover and plug the extra sink holes.
Now if you do have that 4-inch centerset hole configuration, you can use a single hole faucet, as long as it comes with the optional escutcheon plate.
4-inch centerset faucets are made for washbasins with three holes and have handles that are 4 inches apart. They combine a spout and handles on a single base unit. Some centerset faucets may have two handles mounted onto a 6-inch plate.
Widespread, Mini Widespread, 4-Inch Centerset
They typically feature a three-piece design with separate hot and cold water handles and a spout, and measure 4-inches from the center to center of the valves, which is a smaller spread between the handles compared to traditional 8-inch widespread faucets.
Sinks generally come in one of three configurations: 6”, 8”, and 6”-16”. The faucet will cover the holes in most of these configurations. You will need to measure the width between the outer holes or estimate it by measuring the width of the deck plate.
For a basic kitchen sink faucet installation by a pro plumber or a qualified handyperson, you can expect the installation cost to be anywhere from $119 for faucet installation through Home Depot, $92 for faucet installation through Lowe's to $400+ on a complex project.
No, there is a variety of kitchen faucet styles and fittings, and the right style will depend on your home's design.
Clean the area around the base of the faucet with a damp cloth to remove any debris or old sealant. If using plumber's putty, roll it into a long snake-like shape and apply it around the base of the faucet. If using silicone caulk, cut the tip of the tube and apply a thin bead around the base.
They come in different mounting types, hole configurations, and sizes. Common types include single-hole, centre-set, and widespread setups. It's essential to match the faucet to the sink's pre-drilled holes or choose a configuration that can adapt to your specific setup when replacing or installing new faucets.
The biggest difference between a widespread faucet and a centerset faucet is how far apart those handles and spigot are and whether they consist of three separate pieces or one solid unit. So, when you're buying a new faucet, you really need to decide on the form behind the function.
Centerset (4" Faucet Center): This type of faucet can be used on sinks and countertops with one to three holes. This style features a deckplate that contains the handles and spout in one plate. Centerset faucets require holes with 4" centers.
Waterstone Sink Hole Covers are an excellent solution to conceal extra sink holes intended for soap dispensers, side sprays or 2 holed Bridge Faucets. Attractive and practical, our sink hole covers are designed to match all Waterstone Contemporary Faucet Suites. 2-1/8″ width covers most standard sink holes.
The four-inch measurement for a centerset faucet refers to the center-to-center distance between the two furthest mounting holes. Centerset faucets have three mounting holes.
First, it's important to know that three-hole faucets are those that have three separate parts that are visible from the top of the counter – the faucet and two separate handles or levers. These are installed in three holes in the countertop. This type of faucet is also known as a widespread faucet.
If there is a three-hole arrangement, determine the spacing by measuring from the center of the handle. Standard spacing is generally four or eight inches. If you prefer a single-hole faucet and the sink has three holes, don't worry. A cover plate can hide the other holes, and most faucets come with one.