Whether you're moving a thermostat to another room or just moving it to another wall, there are a few main things you need to consider: Try to install your thermostat near the middle of the room or zone that it is controlling. Avoid putting your thermostat near windows, doors, or on exterior walls.
If your thermostat isn't in the right place, it is possible to move it to a new location. However, the amount of work that takes depends on how far away you plan to move it. The reason is that there's a set of control wires running from your HVAC system to the wall where the thermostat resides.
For example, don't place it above air vents, near windows and doors, or in any spot that receives direct sunlight. Placement in these areas can cause false readings, which may cause your heating and cooling systems to run unnecessarily, increasing energy consumption and costs.
Fortunately, in many cases, moving a thermostat is a DIY job that requires a few basic tools. In fact, if you're moving the thermostat to an adjacent wall or replacing the interface, the project may last just an hour or less.
come and move a thermostat it will cost between $200-$400 depending on how long the new wire has to be. The normal labor rates vary per region so it is between $75-$90 dollars per hour and it will probably take all of 2 hours to pull a new wire and rewire and mount the thermostat.
A good spot for the thermostat is in the family room or living room for optimal temperature control. Do install at an optimal height which is roughly 52 to 60 inches off the floor. This is an ideal height to accurately capture the temperature while still being easy to read.
If however, your desired new thermostat location resides far away in another room distant from existing infrastructure, strongly consider hiring an HVAC technician to safely perform the complex wiring rerouting involved.
Wireless thermostats typically range in price from $100 to $250. Features such as geofencing and learning capabilities can increase the cost.
Ideally, your thermostat should sit between 52 and 60 inches above the floor. If your thermostat sits below 52 inches above the floor, it could produce too low readings. Conversely, if it sits above 60 inches, it could have temperature readings that measure high.
Although it's possible to drive with a damaged thermostat housing, it's highly recommended that you don't. Ignoring a coolant leak is flirting with disaster, and cooking your engine can ruin your whole day.
Ideal Thermostat Placement
The best place for your thermostat is on an interior wall, away from all the areas we previously discussed (direct sunlight, air vents, your kitchen, hallways, windows and doors). Ideally, it should be placed toward the center of your home.
Since heat rises, the upstairs rooms will often feel warmer than the downstairs rooms. So an upstairs thermostat might think your entire home is getting too warm and start cooling it down. Instead, we would advise placing your thermostat in a centrally located downstairs space that is used often, like the living room.
While there is a small chance that there is an issue with the running temperature of your engine, by far the most common issue with trouble code P0128 is a faulty thermostat. The exact location of the thermostat and issues related to a damaged thermostat may vary depending on your vehicle.
For example, you'll want to avoid installing your thermostat near windows or doors, or by heat sources or in direct sunlight. You'll also want to avoid putting lamps or TVs near your thermostat, since they release heat that could impact the device settings, according to the US Department of Energy.
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
When it comes to thermostat installation and anything else HVAC-related whether it be installations, repairs, or maintenance, it's always best to call a reputable HVAC company like this one here to make sure that the installation would be done properly by a professional and experienced HVAC technician.
Covering your thermostat with a painting or a frame might sound like a brilliant idea to improve your wall's decor. Unfortunately covering your thermostat prevents it from accurately reading the temperature in your living space.
(They do not apply to private homes that rent fewer than five rooms.) To ensure that people in wheelchairs can reach and adjust the setpoint without assistance, ADA rules specify thermostat placement to be no higher than 48 inches (121 cm) above the floor (assuming no other obstructions are below it).
If you're unsure, or uncomfortable with electrical work, it's always a good idea to consult a professional electrician to ensure the installation is done correctly. If you don't have a C-wire installed, we recommend hiring a professional to install a smart thermostat.
In simple terms, your HVAC system continues to run despite the lack of a Wi-Fi connection. How does this work? Most thermostats will maintain the current settings when the internet goes down. However, you might not be able to change or readjust the temperature settings remotely.
Yes. One of the most significant benefits of having a wireless thermostat is that you have more control over when the heating turns on and off and the temperature you want to set in your room.
For best results, you want the thermostat centrally located. This is a part of the home that you frequently use rather than tucked away in a hall. The thermostat should be positioned at a height of about 52-60 inches. Since heat rises, if the thermostat is higher than that, the readings will tend to be too warm.
Moving a Thermostat: If the required wiring exists at the desired location, moving a thermostat may cost as little as $65. However, moving the unit can entail installing new wiring and cutting and patching drywall, so the project can cost up to $450.