Freestanding vanities are a logical choice when you're remodeling a bathroom. Installation is easier than a suspended vanity, because it's not necessary to provide structural support to the vanity. It is important, however, to secure the vanity to the wall so it doesn't move once the plumbing is connected.
This depends on the type of vanity you choose. For a freestanding vanity that reaches the floor, you can attach it to the wall (or the floor) using simple L-brackets concealed inside the cabinet. If you're installing a floating vanity, you'll need to install bracing on which to hang it.
NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall.
Bathroom vanity units do not need to be attached to a wall, however, wall hanging vanity units are the most popular design on the market. And in small bathrooms in particular, space might dictate that the bathroom vanity unit will have to be attached to the wall.
Clearance in front of the vanity: 21" minimum, although 30" is recommended for a total of 51" from the wall.
Step 2: Measure the Width of Your Space
To accommodate a single-sink vanity, you'll need at least 18" of width available. For a double-sink vanity, you'll need at least 48" of width available. Remember that the vanity top will typically add ½ to 1" on either side of the vanity width.
The standard height of a bathroom vanity is 32 inches or around 2.5 feet. This height has been the standard height for decades and it is very prevalent in older homes.
Despite being fully finished furniture, free-standing vanities are actually more economical than built-in options. They're typically prefabricated and portable, so you can take them with you, even if you move. Versatility. Free-standing vanities come in all kinds of sizes, colors and designs.
Advantages of Freestanding Vanities
Freestanding vanities that are floor-mounted offer more storage space because the cabinets are larger. You typically have more options for choosing the right combination of drawers and cabinets to match your storage needs.
If your vanity is up against a wall you will also need to apply a bead of caulk to seal the gap between the wall and vanity top to prevent any water leaking down.
Bathroom vanity standard height ranges between 82 cm and 91 cm. There are some standardised dimensions for sinks and basins as well. Most vanity basins range from 50 cm to 58 cm, with 53 cm being the most common depth.
A bathroom vanity is a unit that holds the sink and other segments for storage in your bathroom. They are of two main types – free-standing and wall hung. As the name suggests, a freestanding vanity is a unit that is usually rested on the floor while a wall-hung vanity is fixed on the bathroom wall.
If you're wondering if you should get a bathroom vanity backsplash or not, you're not alone. Many homeowners wonder the same thing. And the answer is, if you don't have a pedestal sink that sits against your bathroom wall, you'll likely benefit from having a bathroom vanity backsplash.
Easier to Organize and Clean - Unlike having a base or edges from a freestanding bathroom vanity, cleaning and organizing your bathroom will be much easier and more practical.
If a window is available, position the vanity nearby to capitalize on natural light. If you're relying on artificial light, install fixtures on either side of the mirror—this will illuminate your face more effectively than overhead lighting alone.
'A mirror or mirrored wall could be used behind the vanity to add visual depth, as well as a waterproof solution,' says Rob. 'Or you can avoid a backsplash altogether by using a washstand with one already built-in.
Small-Bathroom Vanity Placement
Placing a vanity in a corner takes advantage of every inch of floor space and also allows for storage options on two walls. A recessed cabinet installed into a sidewall is a smart way to capture space that is typically overlooked.
A floating vanity can create the illusion of more space by opening up the floor space underneath. This makes them ideal for small bathrooms. Cleaning is much easier with a floating vanity, since the entire floor is easy to access. A wall-mounted sink is an attractive addition to the style of a floating vanity.
Generally, flooring contractors prefer that the cabinets go in first so that there is less possibility of the floor getting scratched. Cabinet installers like the floor to be in place so that the cutting and dust from the floor installation will not damage the vanity.
Water control: If water collects on the surface of your countertop, it's important that the surface is as level as possible so the water can pool in place instead of spreading across the surface. That water can drip onto the floor and make the surface unexpectedly slippery.
I always recommend it. For a proper, higher end job, absolutely. That said… most customers prefer to save a few bucks and just put flooring to the vanity.