The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.
Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet. However, definitely take a look at each sink's specifications to make sure it will fit in your cabinet. A sink with a basin dimension that is close or the same as your inside cabinet dimension will be a tight fit.
Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches. The other thing that you need to consider is the depth of the sink. Sinks can have a depth between 6 and 12 inches.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
Sink Landing Counter Space
The landing space requirement at a main sink is 24″ on one side and 18″ on the other side. The countertop landing area beside the main sink helps with Clean-up duties. With the dishwasher typically places on one side of the main sink the 24″ landing counter is taken care of.
Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.
It's no surprise that due to its functional design and timeless and elegant appeal that the fireclay farmhouse sink has made a resurgence among homeowners in America too. Thanks to Joanna Gaines, the fireclay farmhouse sink has gained added popularity and has become a favorite feature in new home kitchens today.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.