When you have a clogged drain you might be tempted to fix the problem yourself before calling a professional. Improperly unclogging a pipe can cause damage, make the clog worse, or be potentially dangerous.
For example, if your pipes are old and corroded, sticking a drain snake down there can scrape off chunks of metal, making the clog much worse and damaging your pipe. A skilled plumber will know how to diagnose a clog, and has the tools and expertise to apply the perfect fix to your situation.
Unfortunately, the pressure from a plunger probably won't break up a shower drain clog. Instead, it will only send the material deeper down the drain pipe completely intact. The clog still exists, but now it's even deeper into your plumbing system, causing your shower to drain slowly or not drain at all.
You'll be pleased to know that a standard blockage, caused by flushing inappropriate materials or too much toilet roll, will unblock itself eventually. Although, bear in mind that the problem will continue until you've had your drains jetted or rodded to remove any leftover obstructions.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Clogs can also be caused by buildup in the third, lateral section of the pipe. Drano® Max Gel Clog Remover is effective on these clog types as well. Keep some on hand for its reliable clog-busting power!
CLEAR THAT CLOG
The best way to clear that clog is by pouring Drano® Max Gel Clog Remover straight over the drain (even if there's standing water). It works by dissolving the remaining hair and gunk—and boom! It works within minutes, and keeps your drain flowing smoothly!
If your clogged toilet does, after a few hours, you may return to a toilet that is overflowing, even though you didn't flush it. Bacteria growth: The water sitting in your toilet can be contaminated with bacteria. By allowing it to sit around for hours, you're giving the opportunity for the bacteria to multiply.
You might want to see if the clog works itself out in time. If you have another toilet you can use, let the clogged one set overnight. The water pressure that builds up in the bowl might actually cause the toilet to unclog itself. After a day's wait, flush the toilet again.
Wait about 10-15 minutes before trying to unclog the toilet, as some water might drain on its own. Squeeze a lot of liquid dish soap, about one cup, or pieces of bar soap into the toilet bowl.
If your plumber snake isn't clearing the clog properly, try: Cleaning the drain snake. If you haven't cleaned it since using it last, the old clog may still be embedded on the corkscrew end. You must clean this end for it to be effective.
If your auger isn't unclogging a clog, it could be because: The old clog is still attached. Are you using a drain snake that has been used before? Make sure the old clog isn't embedded in the corkscrew end.
If your snaking session yields plenty of hair and soap scum, but still leaves you with a slow drain, there's a good chance that the P-trap is still obstructed. To clear it, plug the overflow hole with a rag and fill the tub drain with hot water, which will help to soften and loosen soap scum.
You may be surprised to learn that pouring soda down the drain does work for some clogs. To be specific, you need a dark-colored cola (such as Coca-Cola or Pepsi). This type of carbonated beverage usually contains a good amount of phosphoric acid, which given enough time, can eat away at some types of clogs.
Professional Plumbing Tools 101: Drain Augers
Also known as drain snakes, there are several different versions of drain augers that most plumbers will carry with them at all times. In essence, it's a basic tool, but an auger is best for tough drain clogs that just won't budge and for cleaning out drains, too.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Damaged Pipes — If your home's drainage system is older and made of galvanized materials, there is a very real chance the steelhead of the plumbing snake can scratch the inside of the pipe. Over time, that scratch will rust and weaken the structure of the pipe, until it bursts from the pressure.
If the kitchen drain is blocked, the culprit will most likely be food or grease, which can very easily find its way into drains when sieving your food or doing the washing up. To reduce the likelihood of this happening, try to scrape your plate thoroughly making sure as many food particles go into the bin as possible.
A drain blockage in the kitchen drain is almost always caused by drink and food particles. Fats, oils, and grease (FOG) in particular are known to clog pipes and cause a blocked drain in the kitchen. This is because when these materials are hot from cooking, they are liquid and can easily be poured down the drain.