Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Vinegar is safe and milder than caustic cleaners designed for the toilet, and those commercial cleaning agents can eat away the good bacteria in your septic system. To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl.
Let the stain set overnight and swirl it around the next day. I do this for 5-7 days until I see the vinegar turn from clear to a cloudy, light brown. In a pinch I have used the stain the next day and put on multiple coats, but I get best results by letting it sit for a few days.
Vinegar of almost any type will last until you use it up, with or without refrigeration. I was cooking in a friend's kitchen once and found an unsealed bottle of cider vinegar with a best by date of 10 years previous. It was perfectly fine.
The only real side effect from leaving vinegar to its own devices is that its acidity will gradually decrease over time, making it less potent. This is why a "best by" date can be found on the bottle, but it's still perfectly fine long past that — it isn't an "expiration date," by any means. Vinegar does not expire.
But those effects depend in part on how long the vinegar solution is in contact with a particular surface, says Jason Tetro, a microbiologist in Edmonton, Alberta, and author of “The Germ Files.” “You need at least five minutes for killing bacteria and 30 minutes for viruses.”
The easiest way to remove dark stains from your toilet is to apply white vinegar to the bowl and scrub the stains away with a brush.
The longer the stain is left on, the deeper and richer the color will be. For consistent color, use careful timing. Never allow any stain to dry on the wood surface—it will prevent the clear finish from adhering and cause other issues.
First, slowly pour one cup of baking soda into the toilet bowl. Then, slowly pour a cup of white vinegar into the bowl. The combination of the two will create the fizzing action that will, hopefully, break up the clog. The last step is to pour a kettle full of hot water into the bowl and then try to flush.
Add Antifreeze
The solution is to use marine antifreeze which does not contain harmful chemicals or create the noxious fumes of regular antifreeze. Add a little to your toilet bowl, and an ounce or so to every drain, from the shower to your kitchen sink to prevent any remaining water from freezing.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
It is safe to leave baking soda (and vinegar) to work overnight to unclog a drain. Always flush this mixture down with boiling water—no matter how long you leave it sitting in the drain.
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
The product works by breaking down mineral buildup and rust pretty quickly, so leaving it overnight doesn't necessarily make it more effective. In fact, it could damage your toilet if it's left too long - especially overnight. You should only let it sit for just two to five minutes, depending on how bad the buildup is.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
It is widely claimed that adding aluminum foil to a toilet tank helps to achieve a clean and shiny toilet, but critics challenge these claims due to a lack of scientific evidence.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
Fill a bucket with 1 gallon of warm water and 1/2 cup cleaning vinegar. Use a sponge or microfiber mop, wringing well to prevent over-wetting the floor. Rinse the mop head often. There's no need to rinse the floor; the solution will not leave residue or streaks.
SPRITZ THE GLASS STOVE TOP WITH VINEGAR OR CLEANER
Allow the vinegar or cleaning solution to sit for 10 to 15 minutes. Wipe the surface clean with a soft cloth or cleaning wipes; avoid scouring pads and scrub brushes as these may damage the surface.
Some species produce pigments on solid growth medium and can produce different types of polysaccharides. These bacteria are found in substrates containing sugar and/or ethanol, such as fruit juices, wine, cider, beer, and vinegar.