Avoid any removal tools that heat the carpet, as these will only set the stain. Try rewetting the area, then put an enzyme cleaner in a spray bottle and spray over the area. Let it sit overnight, then soak up the liquid with paper towels.
Step 2: Apply a carpet stain remover.
No matter which carpet cleaner you use, take care not to over-wet the stain, which can damage the backing. Let sit for 10 minutes.
You can use any stain-removing solution you have. Allow it to sit for at least 10 minutes (and up to overnight) and then launder as usual. The stain should be gone, but launder on cool settings and repeat if the stain persists.
Leaving stain removers like Vanish on your garments for too long can have potentially permanent consequences. One possibility is that Vanish could cause the colour of the fabric to fade visibly in the area where the stain was. Another potential outcome is that it may leave a visible ring around where the stain was.
Pretreat with a stain remover or liquid laundry detergent and let sit for several minutes. Rinse well. Wash as recommended according to the garment label. Don't put in the dryer until the stain is gone!
SOAK 1-6 hours depending on severity of stain, some stains may require more time to soak. For best results, soak for 6 hours. WASH as normal with detergent and OxiClean™ Versatile Stain Remover. Tackle other tough food and drink stains, such as coffee or berries, with OxiClean™.
Wood stain is intended to be wiped off immediately after application. If the wood stain remains on the wood, liquid solvents in the stain will evaporate, leaving sticky pigments behind that will never fully dry. To remove tacky wood stain, firmly scrub the piece with mineral spirits.
Using too much stain remover
Using too much can make the area harder to rinse or dry, especially on carpets and upholstery. Light, repeated applications of a remover work much better than flooding a stain.
Applying too much stain remover can make it almost impossible to rinse out completely (especially when you're working with carpets or upholstery). To avoid overdoing it, apply stain removers lightly in repeated applications if necessary.
Yes! Vanish is capable of removing old stains as well as new stains.
For set in stains, allow to penetrate overnight or up to a week. Usage Guidelines: Test in an inconspicuous area prior to use. Can be used on all washable whites and colored fabrics (some colored fabrics may be prone to color change). For fabrics that are prone to color change, do not let stand longer than 5 minutes.
Step Two: I let the clothes soak in the OxiClean for about 8 hours (6 hours is recommended but I just let mine soak overnight). Note: I literally let these SOAK.
Pet Stains on Carpet
Soak the area with a laundry stain remover or other product designed for pet stains according to the manufacturer's instructions. Then use a clean wet sponge dampened with a combination of cold water and laundry detergent to blot the area.
Now you can dampen the stain with a cloth soaked in warm water and grab your stain remover. Work your solution into the carpet fibers gently—never scrub. Blot away any remaining residue with a clean, damp cloth and dab the area dry with a dry cloth.
Apply hydrogen peroxide to the stain – it is often a good idea to put the peroxide in a spray bottle first and then spray the stain. Let the hydrogen peroxide sit for a few minutes and use a bristle brush to scrub the stain. Use a cloth or steam vac to pull the peroxide out of the carpet.
Spray directly into the spot or stain until saturated. Let stand for 5 minutes or up to a week depending on the severity of the stain. For fabrics that are prone to color change, do not let stand longer than 5 minutes.
Sadly, there is no one-size-fits-all stain remover, so that's why we always ask that you share as much information as possible at drop off. There are some stains that are incredibly stubborn, but place that stain on a delicate fabric, then it becomes even more challenging and sometimes impossible to remove.
Hot Water Extraction
Otherwise known as steam cleaning, this is easily the most common professional carpet cleaning technique. Steam cleaning uses hot water at high pressure to penetrate into carpet fibers, breaking down the dirt and bacteria stored deep within. The hot water is then extracted via vacuum.
Mix 1/4 cup of white vinegar, 1 tablespoon of Dawn dish soap, and fill with water. Spray the solution liberally on the stain and let it soak for 5-10 minutes.
Try rewetting the area, then put an enzyme cleaner in a spray bottle and spray over the area. Let it sit overnight, then soak up the liquid with paper towels. For severe carpet stains, try a carpet stain remover like the Bissell Little Green Pro that suctions out deeply rooted stains.
Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain. Also, the rag leaves a beautiful, even, and brush stroke free finish. It also can easily be thrown out once finished.
“In terms of hygiene, it's absolutely unacceptable” not to wipe, says Aaron Glatt, chair of medicine at South Nassau Communities Hospital and spokesperson for the Infectious Disease Society of America. “Find something to clean yourself off with,” he implores. “Use water or leaves.
Applying stain
Don't brush on a coat of stain like you would paint and just wait for it to dry. You'll be frustrated and disappointed when parts of it still feel sticky after a couple days. When wood has absorbed all the stain it wants, the rest just sits on the surface and doesn't like to dry.