In fact, compared to other kinds of pools, fiberglass is very resilient to changes in pressure in and around it. It also doesn't contract or expand much itself due to changes in the temperature around it. So a cold and rainy climate isn't an issue.
Rainfall can damage an excavated pool hole, collapsing its walls. You pool builder will eventually transform a freshly dug pool hole into a beautiful, lasting backyard resort. However, while the hole is still open, it's especially vulnerable to rain.
If you are looking to install a fiberglass pool for the lowest time, both the fall and winter are the best times to achieve this. Most people want a pool installed in the spring or early summer months so they can use it right away and receive fast gratification.
For instance, rain often affects pool installation. It delays the construction process and can interfere with the structure of the pool. So, before you begin constructing your pool, check the weather forecast.
Fiberglass Pools in Cold Climates
Freezing and thawing won't strain or crack a fiberglass pool like it might with a concrete pool, so you shouldn't have to worry as much about your pool cracking or breaking.
Most fiberglass pools are known to last 25-30 years, but we take that to the next level. Our manufacturer, Narellan Pools, makes the best fiberglass pools around. Their unique fiberglass formula results in a pool that can last as long as 50 years! Plus, these pools are notoriously easy to maintain.
Shotcrete needs to be protected from rain until it obtains its final set, usually 4 or 5 hours. Following final set, it should be wet cured for at least 4 days, preferably 7 days if possible. The exposure to rain would prove beneficial as the rain would assure the presence of moisture for continued curing.
As the water freezes, it expands and can start pushing against the skimmer and tiles of your pool causing them to potentially chip, break or fall off completely. It is important to keep water flowing as long as possible to avoid potential damage caused by ice.
Yes, they can freeze solid. If temperatures reach below zero, swimming pools that are not circulating can freeze solid within a few days. If those low temperatures continue for several days, the ice sheet can increase in thickness by up to ¼” per day.
The weather does play an important part on the liner installation also. You want the temp to be at least in the 60s and a sunny day makes for an easier liner install. Check the weather, and avoid overcast or rainy days.
While there are many myths about fiberglass pools, the one thing you should NEVER EVER do is DRAIN your fiberglass pool without professional help. Let me say that again, NEVER drain your fiberglass pool for any reason. In fact, we recommend NEVER letting the water level drop more than 2-3 inches below the skimmer!
In-Ground Pools
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the "Drain" setting, to empty the pool water.
This depends on the type of pool. For above-ground pool, it is best to lower the water up to 18'' below the skimmer. In addition, it is preferable to leave the a good water level in the pool with rain and snow. This way, the pool will retain its shape and prevent water spillage on the ground.
In general concrete (not sure about pool specific stuff) should be kept wet for several days after it is poured or should be painted with sealer to lock in moisture so it can cure correctly within 24 hours of being poured.
Concrete, when applied using the shotcrete process, or cast-in-place, needs to cure for 7 days. Water is the best curing method (7 continuous days).
A: Rain causes delays on the job. We cannot excavate, gunite, pour concrete, install tile or coping, or plaster a pool during the rain. In most cases, we will not work during rain days. Q: How much will rain delay the job?
Fiberglass swimming pools are very compatible with salt water systems. If you are using a vinyl liner pool, you must be careful as those pools tend to have metal parts or connections which salt will eat through and corrode.
While they are easier to install, fiberglass pools are nowhere near as durable as a gunite inground pool. The inside surface of this type pool is a gel coat on which the fiberglass has been laminated. The walls of the pool are only ½ to ⅜ inch thick compared to the 8 to 10 inch thickness of a gunite pool.
In general, quality fiberglass finishes will start to experience some fading at the 8–12 year mark, but if the pool is well maintained it will still continue to look great for decades.
Fiberglass pools are durable
Both the structure and the surface of a high-quality fiberglass pool can last as long as you want them to, provided you take good care of it. A well-made fiberglass pool can last at least 50 years, with less maintenance required to keep it useful and enjoyable decade after decade.
Inground swimming pool LED lights will add a truly breathtaking nighttime appeal to your pool. Providing a luminous setting for impromptu get-togethers and evening swims, inground pool LED lights impart an enchanting ambiance to any style of pool.
Fiberglass pools are both the easiest type of pool to heat and the least expensive. In contrast to vinyl and concrete pools, which have little to no ability to retain warmth, fiberglass is an insulator so it holds heat in your pool.