The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Base cabinet size
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Corner Sink Base Cabinet Options
It is easiest to find corner kitchen sinks to fit into stock or semi-custom corner sink cabinet base options. For many of our projects we used have used 36” corner sink base cabinets and were able to have the 24” wide undermount sinks fit in perfectly.
The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
To put in a farm sink, you have to cut out the existing cabinet front, top, and even back, depending on how much space you need. Since these types of sinks have their aprons exposed, it's important for you to follow the template that comes with your farm sink.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
However, there are some key differences between the two types of sinks. Apron sinks are generally smaller than farmhouse sinks. They are available in various materials, including stainless steel, copper, and porcelain. Apron sinks are available in different styles, including single-bowl and double-bowl options.
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
In most new homes the kitchen sink is approximately 30 inches in length, which is a standard size for a farmhouse sink. The other standard sizes are 24, 33, and 36 inches.
We normally go ⅜ inch inside the sink for the overhang, but this can be flexed for the look you desire.
Once the farmhouse under-mount sink is set, it's time to install the countertops above. For this step, professional help is recommended; you'll need to have precise measurements of the sink's dimensions, as the countertop might need to be adjusted and cut to fit in perfectly.
The shape gives this design more of a compact space, allowing drop-in farmhouse sinks to be available in single, double or even triple bowl styles. However, since these sinks are dropped in, additional supports should be placed to reinforce the sink as it does not have a wall anchor.
Farmhouse sinks typically feature larger, deeper basins than other types of kitchen sinks. These were beneficial for meal prep and clean-up for traditionally large agricultural families. Farmhouse sinks in a modern era still adhere to that basic simple, but ample and efficient, design.
Farmhouse-Style Sinks with Quartz Countertops
Cambria surfaces are durable—more durable than marble or granite countertops—so they're the perfect choice to handle the needs of a farmhouse sink installation.
A porcelain farmhouse sink is a highly coveted kitchen feature—and for good reason. Farmhouse sinks are beautiful, spacious, and timeless, plus they add a distinctive look to any kitchen they're placed in. But before you make the splurge on this pricey kitchen feature, there are a few factors you should consider.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.